Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Enclosed 20W diode laser engraver with camera and 15.7 inch square work area

VEVOR

VEVOR L8 20W Laser Engraver 15.7 in Enclosure Camera

SKU CH-FB5N-GBJ2Y

A 20 W diode laser engraver with a 15.7 in Class 1 enclosure, camera, and 30,000 mm/min speed for wood, leather, glass and certain metals

  • TypeOther Appliances
  • 20W output cuts 0.3 in basswood in one pass
  • 30000 mm/min speed across 15.7 x 15.7 in work area
  • Class 1 enclosure blocks laser light, smoke and noise
  • Auto positioning via 0.12 x 0.15 mm spot and 32-bit board
  • Works with LaserGRBL, LightBurn and CutLabX on Windows, Mac and app

What the L8 20W laser engraver is for

The VEVOR L8 is a Class 1 enclosed diode laser engraver with a 20 W optical output and a 15.7 x 15.7 in working area. It targets makers, small workshops and educators who need a ready-to-use system for cutting and engraving wood, leather, glass, paper and certain metals. The enclosure filters laser light, smoke and noise while safety features include an emergency stop, tilt detection, limit switches and a security lock. Buyers who need a larger bed, higher optical power or open-frame access for oversized stock should look elsewhere.

Thermals noise and power in normal use

The machine runs a 455 nm blue diode with a 0.12 x 0.15 mm spot size on a 32-bit control board. An aluminum frame helps dissipate heat during long jobs at speeds up to 30,000 mm/min. The sealed enclosure contains fumes and reduces audible noise compared with open-frame units. No external chiller or water loop is required; the diode is air-cooled within the cabinet. Power draw figures are not supplied by the manufacturer.

Build integration and workspace needs

The L8 arrives as a single assembled unit measuring 400 x 400 mm effective area, so it fits on a sturdy benchtop without additional frame assembly. Connectivity is via USB to a host computer running LaserGRBL on Windows, LightBurn on macOS or Windows with a paid licence, or CutLabX on macOS, Windows or mobile app. No proprietary controller or separate motion board is needed. Ensure the host PC meets the chosen software’s requirements and that ventilation can handle exhausted air from the enclosure.

Kohokohdat

  • 20W output cuts 0.3 in basswood in one pass
  • 30000 mm/min speed across 15.7 x 15.7 in work area
  • Class 1 enclosure blocks laser light, smoke and noise
  • Auto positioning via 0.12 x 0.15 mm spot and 32-bit board
  • Works with LaserGRBL, LightBurn and CutLabX on Windows, Mac and app

Tekniset tiedot

TypeOther Appliances

Kysymyksiä tästä tuotteesta

How do I install the 400 x 400 mm enclosure and what step is often missed?

Place the unit on a level surface, connect the 32-bit control board cable, and run the auto-positioning calibration in LightBurn or CutLabX before the first job; skipping calibration misaligns the 0.12 x 0.15 mm spot.

What maintenance will the 20 W diode module need over time?

Clean the 455 nm lens with a lint-free swab after every few hours of cutting, check the air-assist nozzle for residue, and replace the diode when engraving depth drops on 0.3 in basswood.

What limit appears first during a long 30,000 mm/min production run?

Heat buildup in the enclosed Class 1 chamber triggers the thermal protection pause, so the emergency-stop and tilt sensors halt the job before the diode degrades.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.