Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black aluminum tower duplicator with 14 front drive bays and blue LCD display

VinPower

VinPower HDDSharkTB-14T-BK 14-target duplicator

SKU CH-P5PB-9XA19 MPN HDDSharkTB-14T-BK

Standalone SATA duplicator copies one source to 14 targets at 150 MB/s with 128 MB buffer and dedicated cooling fan

  • TypeHard Drive Duplicator
  • Target1 to 14
  • Buffer Memory128M
  • Supported MediaFAT16/32, exFAT, NTFS, ext2/3/4
  • Data Transfer RateMaximum Read Speed: 150MB/Sec (9GB/min) Maximum Write Speed:
  • Language SupportEnglish, Spanish, French, German, Italian, Japanese, and mor
  • Duplicate up to 14 drives simultaneously with 1-to-14 target support
  • Achieve 150 MB/s read and write speeds for rapid data transfer
  • 128 MB buffer memory ensures smooth high-throughput copying
  • Standalone operation via 20×2 blue LCD requires no host PC
  • Aluminium chassis with heat grooves and dedicated cooling fan prevents overheating

14-Target SATA Duplicator

The VinPower HDDSharkTB-14T-BK is a standalone hard drive duplicator that copies from one source to up to 14 targets simultaneously. It operates without a host PC and supports FAT16, FAT32, exFAT, NTFS, ext2, ext3 and ext4 file systems. A 20 x 2 blue LCD provides status feedback during operation.

High-Volume Cloning Workflows

This unit suits IT departments, forensic labs and data centres that need to image many SATA drives at once. The 128 MB buffer and dedicated cooling fan help sustain throughput across all ports. Buyers who only duplicate one or two drives at a time, or who need CF card support without purchasing the optional add-on module, should evaluate a smaller device.

150 MB/s Sustained Transfer Rate

The key specification is the simultaneous actual transfer speed of 150 MB/s (9 GB/min) across every target port. This rate is maintained on SATA 1.5, 3.0 and 6.0 Gbps drives thanks to the hardware buffer. If your workflow demands higher per-port bandwidth, this duplicator will not meet that requirement.

Kohokohdat

  • Duplicate up to 14 drives simultaneously with 1-to-14 target support
  • Achieve 150 MB/s read and write speeds for rapid data transfer
  • 128 MB buffer memory ensures smooth high-throughput copying
  • Standalone operation via 20×2 blue LCD requires no host PC
  • Aluminium chassis with heat grooves and dedicated cooling fan prevents overheating

Tekniset tiedot

BrandVINPOWER
ModelHDDSharkTB-14T-BK
TypeHard Drive Duplicator
Target1 to 14
Buffer Memory128M
Supported MediaFAT16/32, exFAT, NTFS, ext2/3/4
Data Transfer RateMaximum Read Speed: 150MB/Sec (9GB/min)
Maximum Write Speed: 150MB/Sec (9GB/min)
Language SupportEnglish, Spanish, French, German, Italian, Japanese, and more(Chinese and Arabic can be ordered on request)
Display20 x 2 Blue LCD
Operating TypeStandalone
ConnectorSATA
Panel ColorBlack
Dimensions (H x W x D)22.00" x 7.50" x 21.00"
Key FeaturesHardware Features:
Aluminum design with heat conductive grooves
Optional CF Support with optional CF Interface Module Add-on
Dedicated HDD Cooling Fan to prevent overheating
Support of all SATA Interface, 1.5 Gbps, 3.0 Gbps, 6.0 Gbps
Industry Leading 150MB/s (9GB/min) Simultaneous Actual Transfer Speed
Screw-Free Hot Swappable HDD Caddy Tray
Safety HDD Tray Lock to prevent accidental HDD removal during operation
Additional LED for HDD Power and HDD Activity, Fan Activity
Power Control of individual HDD for complete HDD spin-down prior removal
2.5" and 3.5" HDD / SSD Support
Software
Power SupplyInput : 90 - 240 V, Up to 500 Watts max
Lähetyspaino15.88 kg
Pakkauksen mitat686 × 635 × 305 mm

Kysymyksiä tästä tuotteesta

Do I need to supply my own SATA drives for the 14 target bays?

Yes, the duplicator provides 14 SATA slots and you must install the source and target drives yourself.

Can I mix 1.5 Gbps, 3.0 Gbps and 6.0 Gbps SATA drives in the same copy job?

The unit supports all three SATA link speeds simultaneously, so mixed-speed drives will copy at each drive's own rate.

How do I verify a copy finished correctly on the 20 x 2 Blue LCD?

The display shows real-time progress and a final PASS or FAIL status for every target once the operation ends.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.