Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

WaveShare

WaveShare 7" 1024x600 IPS Touch Portable Monitor

SKU CH-1667-YJE2D

A 7-inch IPS touchscreen with 1024×600 resolution, 178° viewing angles, HDMI video, micro-USB power and touch, plus Pi-mounting holes and two stands

  • CPU TypeOther
  • Capacitive touch responds instantly to fingertip input
  • 1024 × 600 IPS panel shows vivid colour at 178° viewing angles
  • HDMI signal plus micro-USB power enables driver-free operation
  • Compatible with Raspberry Pi, Windows, macOS and game consoles
  • Four corner holes and two stands simplify DIY mounting

Raspberry Pi 7-inch Touch Display

This 7 inch portable monitor pairs a 1024x600 IPS panel with capacitive touch and dual speakers. It mounts directly to a Raspberry Pi board using the four corner holes and includes two detachable stands for bench use. The driver-free design works with Windows, macOS, Linux, consoles and single-board computers.

HDMI Signal with Micro-USB Power and Touch

Connect video through the HDMI port and supply both power and touch data via a single micro-USB cable. No software installation is required on supported systems. The package notes that Raspberry Pi 4 models need an additional HDMI adapter for the physical connection. Remove the factory screen protector before first use to restore full colour clarity.

Check Your Source Has HDMI and a Spare USB Port

Verify that your host device provides a standard HDMI video output and can deliver 5 V power over a micro-USB connection. The panel accepts input resolutions up to 1920x1080 but displays at its native 1024x600 resolution. Buyers who need a higher native pixel count or an integrated battery should look at other form factors.

Kohokohdat

  • Capacitive touch responds instantly to fingertip input
  • 1024 × 600 IPS panel shows vivid colour at 178° viewing angles
  • HDMI signal plus micro-USB power enables driver-free operation
  • Compatible with Raspberry Pi, Windows, macOS and game consoles
  • Four corner holes and two stands simplify DIY mounting

Tekniset tiedot

CPU TypeOther

Kysymyksiä tästä tuotteesta

How do I verify the IPS panel is showing the full 178-degree viewing angle after setup?

View the screen from extreme side angles; colours and contrast should remain consistent up to 178 degrees horizontally and vertically.

Which cables and accessories are included versus what I must buy separately for a Raspberry Pi 4?

The box contains the 7-inch monitor, two detachable stands and a screen protector; you must supply an HDMI cable, a micro-USB power-and-touch cable and an HDMI adapter for Pi 4.

Should I choose the native 1024x600 resolution or the supported 1920x1080 input for my project?

Use 1024x600 for pixel-perfect touch mapping; 1920x1080 input is accepted but will be downscaled to the panel's native grid.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.