Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular circuit board with 40-pin header and multiple ports

WaveShare

WaveShare BIGTREETECH Pi4B Adapter V1.0 Carrier Board 40-pin

SKU CH-Y8H4-E2J2G

Carrier board matches Raspberry Pi 4B mounting and adds Gigabit Ethernet, dual HDMI, CSI, CAM and USB ESD protection for CM4 modules

  • CPU TypeOther
  • Uses Raspberry Pi 4B outline with matching mounting holes
  • Gigabit Ethernet plus dual HDMI, CAM and CSI interfaces
  • ESD protection on USB and network ports plus 40-pin header
  • Type-C writes CM4 eMMC and powers the whole board
  • Reserved 5 V connector for a CM4 cooling fan

Carrier Board for CM4 and CB1 Modules

This adapter board matches the Raspberry Pi 4B outline and mounting holes while supporting various Compute Module 4 versions and the CB1 module. It provides a 40-pin header with standard Raspberry Pi functions and adds Gigabit Ethernet, dual HDMI outputs, camera and CSI connectors. The board is designed for makers integrating a CM4 into custom projects such as Voron 3D printers running Klipper.

Interface Limits on the Carrier

The board exposes a Gigabit Ethernet port, two HDMI interfaces and USB connections with ESD protection, but it does not add any additional high-speed lanes beyond what the CM4 module itself provides. A Type-C connector handles both eMMC flashing and system power input, while a reserved 5V header allows an external fan connection. Builders needing extra PCIe lanes, additional USB controllers or onboard wireless must look elsewhere.

40-Pin Header Determines Compatibility

The double-row 40-pin header replicates the Raspberry Pi GPIO layout, so any HAT or peripheral designed for that pinout will connect mechanically and electrically. If a project requires a different pin count, spacing or voltage level, this carrier board will not fit without an adapter. Verify the peripheral’s pinout matches the standard 40-pin Raspberry Pi arrangement before purchase.

Kohokohdat

  • Uses Raspberry Pi 4B outline with matching mounting holes
  • Gigabit Ethernet plus dual HDMI, CAM and CSI interfaces
  • ESD protection on USB and network ports plus 40-pin header
  • Type-C writes CM4 eMMC and powers the whole board
  • Reserved 5 V connector for a CM4 cooling fan

Tekniset tiedot

CPU TypeOther

Kysymyksiä tästä tuotteesta

Should I pick the V1.0 or V1.1 control board for my Voron build?

The adapter supports Octopus V1.1 and SKR Mini E3 V3.0 control boards; choose the board that matches your printer's firmware and stepper-driver requirements.

What does the Gigabit Ethernet port actually deliver when the CM4 is installed?

It provides a wired 1 Gb/s network link for fast Klipper communication and file transfers, limited only by the CM4's internal throughput.

How does the Type-C connector limit power and data for the CM4?

The Type-C port flashes eMMC CM4 modules and powers the entire carrier, so a single 5 V supply runs the compute module and attached peripherals.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.