Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Wavlink

Wavlink RapidFire H2R 2-bay SATA drive enclosure

SKU CH-SH5R-4YBF6

Two-bay SATA enclosure holds two 3.5″ or 2.5″ drives up to 22 TB each with 10 Gbps USB-C, four RAID modes and auto-sleep after 15 minutes

  • ColorBlack
  • Size2.5" & 3.5"
  • TypeHDD/SSD
  • MaterialAluminum
  • Internal InterfaceSATA
  • External Interface2.5" & 3.5"
  • Up to 10Gbps transfer speed via USB 3.2 Type-C port
  • Supports two SATA drives up to 22TB each for 44TB total capacity
  • Four RAID modes: Normal, Large, RAID 0 and RAID 1
  • Aluminium alloy shell with dual fans activating at 48°C for active cooling
  • Hot-swappable bays and auto-sleep after 15 minutes of inactivity

Two-bay SATA enclosure for 3.5 and 2.5 drives

The Wavlink RapidFire H2R holds two SATA hard drives or SSDs in 3.5 or 2.5 inch form factors. Each bay accepts up to 22TB, giving a total of 44TB. It connects via a USB-C port running at 10Gbps and works with Windows, Mac, Linux, Chrome OS, Android, iOS, Harmony OS and iPad OS on computers, phones or tablets with USB-C or USB-A ports.

Tool-free trays with automatic cooling

Drives slide into the trays and are secured with the included screws; 2.5 inch drives need separate 2.5 to 3.5 mounting brackets that are not supplied. Dual built-in fans start automatically at 48°C. RAID mode is set by a hardware switch with Normal, Large, RAID 0 and RAID 1 options; changing the mode erases all data on the installed drives, so a backup is essential before switching.

Verify host port and drive preparation

The 10Gbps speed requires a host USB-C port that supports USB 3.2 Gen 2; slower ports will limit performance. New, unformatted SSDs must be partitioned before the operating system can recognise them. The enclosure enters sleep mode after 15 minutes of inactivity and supports hot-swap drive changes without powering down the host. Up to three units can be daisy-chained.

Kohokohdat

  • Up to 10Gbps transfer speed via USB 3.2 Type-C port
  • Supports two SATA drives up to 22TB each for 44TB total capacity
  • Four RAID modes: Normal, Large, RAID 0 and RAID 1
  • Aluminium alloy shell with dual fans activating at 48°C for active cooling
  • Hot-swappable bays and auto-sleep after 15 minutes of inactivity

Tekniset tiedot

BrandWavlink
ModelRapidFire H2R
ColorBlack
Size2.5" & 3.5"
TypeHDD/SSD
MaterialAluminum
Internal InterfaceSATA
External Interface2.5" & 3.5"
HDD Count Supported2.5 / 3.5 inch SATA Hard Disk
Number of Bay2 Bay
Maximum Capacity (per Bay)Up to 22TB
FanYes
Operating Systems SupportedCompatibility Notes
Systems: Windows, Mac OS, Chrome OS, Linux, Android, iOS, Harmony OS, iPad OS;
Host: Computers/phones/tablets with a USB-C/USB-A port;
HDD/SSD: 3.5" and 2.5'' SATA HDD/SSD. For 2.5'' hard drives, additional 2.5'' to 3.5'' mounting brackets are required(Not included).
Features- One USB-C upstream port transfers speed up to 10Gbps, and is compatible with USB 3.2/3.1/2.0 computers.
- Dual 3.5" SATA HDD for massive storage capacity expansion.
- RAID 0/1/Large/Normal mode for the data of backup, read and write, and other different needs.
- Supports computer-linked control, with synchronized power on and off for the computer.
- Supports multi-disk daisy-chaining, creating a multi-disk, multi-device, multi-task workstation.
- Thickened aluminum panel, low-noise temperature-controlled fan, and honeycomb ventilation holes for efficient heat dissipation.
Package Contents- 1 x Dual Bay USB-C 3.5"SATA HDD Enclosure
- 1 x Power Adapter
- 2 x Screwdriver
- 1 x USB-C to USB-C Cable
- 1 x USB-C to USB-A Cable
- 1 x Quick Start Guide
- Several Screws

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I know the enclosure is operating correctly after I connect it?

The dual fans spin up automatically at 48°C, the front LEDs show drive activity and RAID status, and your host device lists both SATA drives at up to 10Gbps over the USB 3.2 Gen 2 link.

What comes in the box and what must I supply myself?

The package includes the dual-bay enclosure, power adapter, USB-C to USB-C cable, USB-C to USB-A cable, two screwdrivers, mounting screws and a quick-start guide; 2.5″ drives need separate 2.5″-to-3.5″ brackets which are not included.

Which RAID mode should I pick for maximum usable capacity versus data safety?

RAID 0 combines both bays for up to 44TB total space with no redundancy; RAID 1 mirrors the drives for protection but halves usable capacity to 22TB; Large spans drives sequentially and Normal treats them as independent volumes.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.