Western Digital WD60EFPX 6TB 5400 RPM 256MB SATA 3.5" internal hard drive
- SATA 6.0Gb/s
- 6TB
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Western Digital
10 TB CMR drive at 7200 RPM with 512 MB cache, built for 24×7 NAS workloads up to 180 TB per year
The WD Red Plus WD100EFGX is a 10 TB CMR hard drive built for multi-bay NAS enclosures. Its NASware firmware tunes drive behaviour for continuous RAID workloads in small and medium business environments. The 7200 RPM spindle and 512 MB cache deliver sustained throughput for shared storage and backup tasks.
Verify that your NAS chassis accepts 3.5 inch drives up to 26.10 mm high, 101.60 mm wide and 147.00 mm long. A free SATA 6.0 Gb/s port and matching power connector are required. The drive supports up to eight bays per system, so confirm your enclosure bay count before ordering.
The drive is rated for a 180 TB annual workload rate, reflecting 24x7 operation rather than burst transfers. CMR recording avoids the write slowdowns seen with shingled media during long rebuilds or heavy multi-user access. NASware firmware maintains consistent error recovery during extended RAID rebuilds.
| Brand | WD |
|---|---|
| Series | Red Plus |
| Model | WD100EFGX |
| Interface | SATA 6.0Gb/s |
| Capacity | 10TB |
| NAND Flash Memory Type | Hard Drive |
| Recording Technology | CMR |
| RPM | 7200 RPM |
| Cache | 512MB |
| Features | Tuned for NAS with NASware™ Western Digital’s exclusive NASware™ technology fine tunes drive parameters to match NAS system workloads, which helps increase performance and reliability. Designed for Continuous Operation Since your NAS system is always on, a reliable drive is essential. WD Red Plus hard drives are designed for systems that operate 24x7, giving users the confidence of knowing they can reliably access their data. Tested for Dependable Compatibility Western Digital partners with a wide range of NAS system vendors for extensive testing to ensure compatibility with most NAS |
| Usage | For NAS systems |
| Form Factor | 3.5" |
| Height (maximum) | 26.10mm |
| Width (maximum) | 101.60mm |
| Length (maximum) | 147.00mm |
| Lähetyspaino | 0.70 kg |
| Pakkauksen mitat | 152 × 102 × 25 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The drive is supplied as a bare 3.5" SATA unit; SATA data and power cables plus mounting hardware are not included and must be sourced separately.
The 10TB version balances cost per terabyte and raw space for mid-sized NAS arrays while staying within the 8-bay limit and 180 TB/yr workload rating.
The 7200 RPM spindle and 512MB cache sustain the sequential throughput needed for multi-stream RAID workloads in a continuously operating NAS.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?