Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
3.5 inch silver drive in IcePack frame with heat sink

Western Digital

Western Digital WD3000HLFS VelociRaptor 300GB 10000 RPM 16MB SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-10FK-G4E9K MPN WD3000HLFS

A 300 GB 10000 RPM SATA hard drive with 16 MB cache in a 3.5 inch IcePack frame

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity300GB
  • RPM10000 RPM
  • Cache16MB
  • Average Seek Time4.2ms
  • 10,000 RPM spindle delivers fast data access
  • 16 MB cache buffers bursts for smoother throughput
  • SATA 3.0 Gb/s interface supports NCQ and hot-plug
  • 5-inch mechanism in 3.5-inch IcePack frame aids cooling
  • 2 ms average seek cuts latency for server workloads

High-speed server storage

The Western Digital VelociRaptor WD3000HLFS is a 300GB 3.5-inch internal hard drive spinning at 10000 RPM with a 16MB cache. It connects through a SATA 3.0Gb/s interface and is supplied as a bare drive. The unit is designed for server environments that demand quick data access.

Capacity and headroom

The 300GB capacity suits operating systems, applications and frequently accessed project files. Average seek time of 4.2ms and average write time of 4.7ms keep latency low at 3ms nominal during heavy read and write workloads. Larger media libraries or long-term archives will exceed the available space.

Build integration

A 2.5-inch mechanism sits inside an IcePack mounting frame that provides a 3.5-inch backplane-ready form factor with an integrated heat sink. The drive requires a standard SATA data and power connection in a 3.5-inch bay. The frame frees the builder from sourcing a separate adapter or cooling bracket.

Kohokohdat

  • 10,000 RPM spindle delivers fast data access
  • 16 MB cache buffers bursts for smoother throughput
  • SATA 3.0 Gb/s interface supports NCQ and hot-plug
  • 5-inch mechanism in 3.5-inch IcePack frame aids cooling
  • 2 ms average seek cuts latency for server workloads

Tekniset tiedot

BrandWestern Digital
SeriesWD VelociRaptor
ModelWD3000HLFS
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity300GB
RPM10000 RPM
Cache16MB
Average Seek Time4.2ms
Average Write Time4.7ms
Average Latency3ms (nominal)
FeaturesIcePack mounting frame: the 2.5-inch WD VelociRaptor is enclosed in a backplane-ready 3.5-inch enterprise-class mounting frame with a built-in heat sink.
UsageIdeal for Servers
Form Factor3.5"
Lähetyspaino0.50 kg
Pakkauksen mitat147 × 102 × 25 mm

Kysymyksiä tästä tuotteesta

Will the 3.5-inch IcePack frame let this 10000 RPM VelociRaptor fit in the same drive bay as my older 3.5-inch SATA drives?

Yes, the 2.5-inch mechanism is mounted inside a 3.5-inch enterprise frame with a built-in heat sink, so it occupies a standard 3.5-inch bay and uses the same SATA 3.0Gb/s connectors as older drives.

How can I verify the 10000 RPM VelociRaptor is performing at its rated 4.2 ms seek and 3 ms latency after installation?

Run a SMART health check and a synthetic benchmark such as CrystalDiskMark; sustained throughput near the SATA 3.0Gb/s ceiling and access times close to 4.2 ms read / 4.7 ms write confirm the drive is operating to specification.

The listing says bare drive — does the package include SATA data and power cables or the IcePack mounting screws?

Bare drive means only the VelociRaptor inside its 3.5-inch IcePack frame is supplied; SATA data cable, power cable and any mounting screws must be purchased separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.