Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SATA hard drive with circuit board visible

Western Digital

Western Digital WD5003ABYX 500GB 7.2K RPM 3Gb/s 3.5" SATA internal hard drive

SKU CH-9XXC-8NMS7

High-capacity 3.5" SATA desktop drive with 7200RPM speed and 64MB cache for reliable data center storage

  • 500 GB capacity supports large data workloads
  • 7200 RPM spindle speed delivers responsive performance
  • 64 MB cache buffers intensive read and write operations
  • 5 inch SATA interface fits standard desktop bays
  • Dual processor and StableTrac technologies enhance drive reliability

Enterprise-ready 500 GB SATA drive

This Western Digital WD5003ABYX is a 3.5-inch internal hard drive built for high-availability deployments. It targets data-centre operators and system integrators who need durable capacity storage with proven workload capability. The 7200 RPM spindle and 64 MB buffer support sustained throughput in multi-drive arrays. It is not suited for buyers who want faster solid-state performance or larger single-drive capacities.

Sustained workload behaviour

Dual-processor architecture and StableTrac technology stabilise the motor and actuator during continuous operation. Time-Limited Error Recovery limits error-correction pauses so the drive remains responsive under heavy queue depths. Rotary Acceleration Feed Forward and shock-sensor technology compensate for vibration in dense chassis. Perpendicular Magnetic Recording maintains data integrity across long write sequences.

Thermals, noise and power

Active Power Save and IntelliSeek reduce seek power and acoustic output during typical access patterns. NoTouch Ramp Load technology eliminates head-disk contact during spin-up and idle, lowering wear and noise. Dual Actuator Technology balances mechanical forces for cooler, quieter operation in normal use. The SATA 3 Gb/s interface limits peak power draw to the bus specification.

Kohokohdat

  • 500 GB capacity supports large data workloads
  • 7200 RPM spindle speed delivers responsive performance
  • 64 MB cache buffers intensive read and write operations
  • 5 inch SATA interface fits standard desktop bays
  • Dual processor and StableTrac technologies enhance drive reliability

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How much noise and heat does the WD5003ABYX produce when running continuously?

The 7200RPM spindle and dual processor design prioritise stable operation in data-centre environments, while Active Power Save and IntelliSeek reduce acoustic output and power draw during idle periods.

What existing hardware is required to install this WD5003ABYX drive?

A standard 3.5-inch drive bay, a SATA 3Gb/s data cable and a matching SATA power connector from the power supply are all that is needed for installation.

Can the WD5003ABYX share a SATA controller with older 3Gb/s drives without slowing them down?

Each drive negotiates its own link speed, so the WD5003ABYX will run at 3Gb/s alongside other 3Gb/s devices without forcing a lower bus speed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.