Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White triple-fan graphics card with silver accents and exposed vapor chamber visible through the cooler

ZOTAC

ZOTAC ZT-B50710C-10P GeForce RTX 5070 Ti APOCALYPSE graphics card

SKU CH-NRQD-W83PK MPN ZT-B50710C-10P

Refurbished GeForce RTX 5070 Ti with 16GB GDDR7 memory, 8960 CUDA cores and a 2572 MHz boost clock on a triple-fan IceStorm 3.0 cooler

  • InterfacePCI Express 5.0 x16
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 50 Series
  • GPUGeForce RTX 5070 Ti
  • ArchitectureBlackwell
  • Boost ClockBoost: 2572 MHz
  • 16 GB GDDR7 memory at 28 Gbps feeds high-resolution textures fast
  • Boost clock of 2572 MHz delivers strong frame rates in demanding titles
  • Triple-fan IceStorm 3.0 cooler with vapor chamber keeps thermals controlled under load
  • PCIe 5.0 x16 interface provides full bandwidth for modern platforms
  • One HDMI 2.1b and three DisplayPort 2.1b outputs drive up to four displays

ZOTAC APOCALYPSE RTX 5070 Ti 16GB

This refurbished graphics card targets enthusiasts who need high frame rates at 4K resolution. It uses the NVIDIA Blackwell architecture with 8960 CUDA cores and a 2572 MHz boost clock. The 16GB GDDR7 memory runs at 28 Gbps across a 256-bit bus. Four display outputs support multi-monitor setups up to 7680 x 4320 resolution.

Upgrade from RTX 30 series or earlier

Moving to this 50 series card adds DLSS 4 support and PCI Express 5.0 bandwidth. The jump is worth it when your current GPU limits ray-traced titles or AI workloads. A 300W TDP and 800W PSU requirement mean you must verify power headroom before buying. The single 16-pin connector replaces older dual 8-pin layouts.

Installation fits standard PCIe 5.0 slots

The triple-fan IceStorm 3.0 cooler uses a vapor chamber and composite heatpipes with pass-through airflow. Ensure your case clears the card length and the 16-pin cable routes without sharp bends. Common issues include insufficient PSU wattage, loose power connectors, and driver conflicts when upgrading from older architectures. FREEZE fan stop keeps noise low at idle.

Kohokohdat

  • 16 GB GDDR7 memory at 28 Gbps feeds high-resolution textures fast
  • Boost clock of 2572 MHz delivers strong frame rates in demanding titles
  • Triple-fan IceStorm 3.0 cooler with vapor chamber keeps thermals controlled under load
  • PCIe 5.0 x16 interface provides full bandwidth for modern platforms
  • One HDMI 2.1b and three DisplayPort 2.1b outputs drive up to four displays

Tekniset tiedot

BrandZOTAC
SeriesAPOCALYPSE
ModelZOTAC GAMING GeForce RTX 5070 Ti APOCALYPSE OC
Part NumberZT-B50710C-10P
InterfacePCI Express 5.0 x16
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 50 Series
GPUGeForce RTX 5070 Ti
ArchitectureBlackwell
Boost ClockBoost: 2572 MHz
CUDA Cores8960
Effective Memory Clock28 Gbps
Memory Size16GB
Memory Interface256-Bit
Memory TypeGDDR7
DirectXDirectX 12 Ultimate
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI1 x HDMI 2.1b
DisplayPort3 x DisplayPort 2.1b
ColorWhite
Max Resolution7680 x 4320
CrossFireX SupportNo
SLI SupportNo
Virtual Reality ReadyYes
CoolerTriple Fans
Thermal Design Power300W
Recommended PSU Wattage800W
Power Connector1 x 16-Pin
HDCP ReadyYes
FeaturesPowered by the NVIDIA Blackwell architecture and DLSS 4
16GB GDDR7, 256-bit, 28 Gbps, PCIE 5.0
IceStorm 3.0 Advanced Cooling, 3x 100mm BladeLink fans, Vapor Chamber, Composite Heatpipes, Pass-thru Airflow Design, FREEZE Fan Stop, Active Fan Control
Metal Backplate, Reinforced Frame Structure, Dual BIOS, SPECTRA 2.0 ARGB Lighting, SPECTRA Link, Power Safety Light, Bundled GPU Support Stand
3 x DisplayPort 2.1b, 1 x HDMI 2.1b, 8K Ready, 4 Display Ready, HDCP 2.3, VR Ready
Boost Clock 2572 MHz
Form FactorATX
Max GPU Length369 mm
Card Dimensions (L x H)14.2*2.9*5.4 inch
Slot Width3.5 Slots
Lähetyspaino3.22 kg
Pakkauksen mitat457 × 273 × 127 mm

Kysymyksiä tästä tuotteesta

What case clearance does the triple-fan APOCALYPSE cooler need?

The card uses three 100 mm BladeLink fans with a vapor chamber and composite heatpipes; measure your case for a triple-slot, triple-fan design before buying.

Which power connector and PSU rating are required for the 300 W board?

Connect the single 16-pin power connector and use at least an 800 W PSU; the common mistake is leaving the 16-pin partially seated, so push until it clicks.

How should the IceStorm 3.0 cooler be maintained over time?

Periodically blow dust from the three fans, vapor chamber fins and pass-through airflow channels; the FREEZE fan-stop feature means fans stay off at idle, so dust settles quietly.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.