ZOTAC
ZOTAC ZT-B50710C-10P GeForce RTX 5070 Ti APOCALYPSE graphics card
Refurbished GeForce RTX 5070 Ti with 16GB GDDR7 memory, 8960 CUDA cores and a 2572 MHz boost clock on a triple-fan IceStorm 3.0 cooler
- InterfacePCI Express 5.0 x16
- Chipset ManufacturerNVIDIA
- GPU SeriesNVIDIA GeForce RTX 50 Series
- GPUGeForce RTX 5070 Ti
- ArchitectureBlackwell
- Boost ClockBoost: 2572 MHz
- 16 GB GDDR7 memory at 28 Gbps feeds high-resolution textures fast
- Boost clock of 2572 MHz delivers strong frame rates in demanding titles
- Triple-fan IceStorm 3.0 cooler with vapor chamber keeps thermals controlled under load
- PCIe 5.0 x16 interface provides full bandwidth for modern platforms
- One HDMI 2.1b and three DisplayPort 2.1b outputs drive up to four displays
ZOTAC APOCALYPSE RTX 5070 Ti 16GB
This refurbished graphics card targets enthusiasts who need high frame rates at 4K resolution. It uses the NVIDIA Blackwell architecture with 8960 CUDA cores and a 2572 MHz boost clock. The 16GB GDDR7 memory runs at 28 Gbps across a 256-bit bus. Four display outputs support multi-monitor setups up to 7680 x 4320 resolution.
Upgrade from RTX 30 series or earlier
Moving to this 50 series card adds DLSS 4 support and PCI Express 5.0 bandwidth. The jump is worth it when your current GPU limits ray-traced titles or AI workloads. A 300W TDP and 800W PSU requirement mean you must verify power headroom before buying. The single 16-pin connector replaces older dual 8-pin layouts.
Installation fits standard PCIe 5.0 slots
The triple-fan IceStorm 3.0 cooler uses a vapor chamber and composite heatpipes with pass-through airflow. Ensure your case clears the card length and the 16-pin cable routes without sharp bends. Common issues include insufficient PSU wattage, loose power connectors, and driver conflicts when upgrading from older architectures. FREEZE fan stop keeps noise low at idle.
Points forts
- 16 GB GDDR7 memory at 28 Gbps feeds high-resolution textures fast
- Boost clock of 2572 MHz delivers strong frame rates in demanding titles
- Triple-fan IceStorm 3.0 cooler with vapor chamber keeps thermals controlled under load
- PCIe 5.0 x16 interface provides full bandwidth for modern platforms
- One HDMI 2.1b and three DisplayPort 2.1b outputs drive up to four displays
Caractéristiques
| Brand | ZOTAC |
|---|---|
| Series | APOCALYPSE |
| Model | ZOTAC GAMING GeForce RTX 5070 Ti APOCALYPSE OC |
| Part Number | ZT-B50710C-10P |
| Interface | PCI Express 5.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 50 Series |
| GPU | GeForce RTX 5070 Ti |
| Architecture | Blackwell |
| Boost Clock | Boost: 2572 MHz |
| CUDA Cores | 8960 |
| Effective Memory Clock | 28 Gbps |
| Memory Size | 16GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR7 |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1b |
| DisplayPort | 3 x DisplayPort 2.1b |
| Color | White |
| Max Resolution | 7680 x 4320 |
| CrossFireX Support | No |
| SLI Support | No |
| Virtual Reality Ready | Yes |
| Cooler | Triple Fans |
| Thermal Design Power | 300W |
| Recommended PSU Wattage | 800W |
| Power Connector | 1 x 16-Pin |
| HDCP Ready | Yes |
| Features | Powered by the NVIDIA Blackwell architecture and DLSS 4 16GB GDDR7, 256-bit, 28 Gbps, PCIE 5.0 IceStorm 3.0 Advanced Cooling, 3x 100mm BladeLink fans, Vapor Chamber, Composite Heatpipes, Pass-thru Airflow Design, FREEZE Fan Stop, Active Fan Control Metal Backplate, Reinforced Frame Structure, Dual BIOS, SPECTRA 2.0 ARGB Lighting, SPECTRA Link, Power Safety Light, Bundled GPU Support Stand 3 x DisplayPort 2.1b, 1 x HDMI 2.1b, 8K Ready, 4 Display Ready, HDCP 2.3, VR Ready Boost Clock 2572 MHz |
| Form Factor | ATX |
| Max GPU Length | 369 mm |
| Card Dimensions (L x H) | 14.2*2.9*5.4 inch |
| Slot Width | 3.5 Slots |
| Poids d’expédition | 3.22 kg |
| Dimensions du colis | 457 × 273 × 127 mm |
Questions sur cet article
What case clearance does the triple-fan APOCALYPSE cooler need?
The card uses three 100 mm BladeLink fans with a vapor chamber and composite heatpipes; measure your case for a triple-slot, triple-fan design before buying.
Which power connector and PSU rating are required for the 300 W board?
Connect the single 16-pin power connector and use at least an 800 W PSU; the common mistake is leaving the 16-pin partially seated, so push until it clicks.
How should the IceStorm 3.0 cooler be maintained over time?
Periodically blow dust from the three fans, vapor chamber fins and pass-through airflow channels; the FREEZE fan-stop feature means fans stay off at idle, so dust settles quietly.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



