Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Handheld oscilloscope multimeter with 3.5 inch IPS display

ZOYI

ZOYI ZT-703S 3-in-1 Oscilloscope Multimeter 3.5 Inch IPS 25000 Counts 50MHz 280MSa/s ±400V

SKU CH-DPW4-NXRZT

A 3.5-inch IPS handheld combines a 50 MHz dual-channel oscilloscope, 25000-count multimeter and signal generator with 280 MSa/s sampling and ±400 V input, rated CAT III 1000 V and CAT II 600 V

  • Chassis TypeDesktop
  • 3-in-1 oscilloscope, multimeter and signal generator simplifies bench work
  • 50 MHz bandwidth and 280 MSa/s real-time sampling capture fast signals
  • 25 000-count multimeter with 3.5-inch IPS display reads voltage, current, resistance, capacitance and frequency
  • ±400 V input range with CAT III 1000 V / CAT II 600 V safety ratings protects user and device
  • One-key automatic measurement and calibration speeds up routine testing

Compact 3-in-1 Test Instrument

The ZOYI ZT-703S combines a digital oscilloscope, signal generator and multimeter in a desktop chassis with a 3.5 inch IPS display. It targets engineers, technicians and hobbyists who need bench-top waveform capture, signal output and standard multimeter ranges in one unit.

Safety-Rated Inputs and Sampling

The oscilloscope channel accepts up to ±400 V input and is rated for CAT II 600 V, while the multimeter meets CAT III 1000 V. Real-time sampling reaches 280 MSa/s at 50 MHz bandwidth, and the 25000-count display resolves measurements without active cooling noise.

Automated Features and Data Tools

One-key automatic measurement runs calibration and captures readings without manual ranging. Users can save and export data, select interface languages, adjust backlight brightness and set a custom auto-shutdown timer. The ABS and TPE moulded housing meets CE requirements for bench durability.

Kohokohdat

  • 3-in-1 oscilloscope, multimeter and signal generator simplifies bench work
  • 50 MHz bandwidth and 280 MSa/s real-time sampling capture fast signals
  • 25 000-count multimeter with 3.5-inch IPS display reads voltage, current, resistance, capacitance and frequency
  • ±400 V input range with CAT III 1000 V / CAT II 600 V safety ratings protects user and device
  • One-key automatic measurement and calibration speeds up routine testing

Tekniset tiedot

Chassis TypeDesktop

Kysymyksiä tästä tuotteesta

How do I connect the probes to the dual-channel 50MHz inputs and what step do users often skip?

Attach each probe to the BNC connectors for Channel 1 and Channel 2, then run the one-key automatic calibration before measuring; skipping this calibration is the common error.

Which parts of the ZT-703S will need periodic replacement?

The test leads and probe tips wear with use; the internal rechargeable battery will eventually hold less charge and should be swapped when run-time drops noticeably.

What is the first limit reached during continuous high-speed capture at 280MSa/s?

The 25000-count display resolution and 50MHz bandwidth constrain the visible detail before the sampling rate becomes the bottleneck.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.