Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Handheld oscilloscope multimeter with 3.5 inch IPS display

ZOYI

ZOYI ZT-703S 3-in-1 Oscilloscope Multimeter 3.5 Inch IPS 25000 Counts 50MHz 280MSa/s ±400V

SKU CH-DPW4-NXRZT

A 3.5-inch IPS handheld combines a 50 MHz dual-channel oscilloscope, 25000-count multimeter and signal generator with 280 MSa/s sampling and ±400 V input, rated CAT III 1000 V and CAT II 600 V

  • Chassis TypeDesktop
  • 3-in-1 oscilloscope, multimeter and signal generator simplifies bench work
  • 50 MHz bandwidth and 280 MSa/s real-time sampling capture fast signals
  • 25 000-count multimeter with 3.5-inch IPS display reads voltage, current, resistance, capacitance and frequency
  • ±400 V input range with CAT III 1000 V / CAT II 600 V safety ratings protects user and device
  • One-key automatic measurement and calibration speeds up routine testing

Compact 3-in-1 Test Instrument

The ZOYI ZT-703S combines a digital oscilloscope, signal generator and multimeter in a desktop chassis with a 3.5 inch IPS display. It targets engineers, technicians and hobbyists who need bench-top waveform capture, signal output and standard multimeter ranges in one unit.

Safety-Rated Inputs and Sampling

The oscilloscope channel accepts up to ±400 V input and is rated for CAT II 600 V, while the multimeter meets CAT III 1000 V. Real-time sampling reaches 280 MSa/s at 50 MHz bandwidth, and the 25000-count display resolves measurements without active cooling noise.

Automated Features and Data Tools

One-key automatic measurement runs calibration and captures readings without manual ranging. Users can save and export data, select interface languages, adjust backlight brightness and set a custom auto-shutdown timer. The ABS and TPE moulded housing meets CE requirements for bench durability.

Prednosti

  • 3-in-1 oscilloscope, multimeter and signal generator simplifies bench work
  • 50 MHz bandwidth and 280 MSa/s real-time sampling capture fast signals
  • 25 000-count multimeter with 3.5-inch IPS display reads voltage, current, resistance, capacitance and frequency
  • ±400 V input range with CAT III 1000 V / CAT II 600 V safety ratings protects user and device
  • One-key automatic measurement and calibration speeds up routine testing

Špecifikácie

Chassis TypeDesktop

Otázky k tomuto produktu

How do I connect the probes to the dual-channel 50MHz inputs and what step do users often skip?

Attach each probe to the BNC connectors for Channel 1 and Channel 2, then run the one-key automatic calibration before measuring; skipping this calibration is the common error.

Which parts of the ZT-703S will need periodic replacement?

The test leads and probe tips wear with use; the internal rechargeable battery will eventually hold less charge and should be swapped when run-time drops noticeably.

What is the first limit reached during continuous high-speed capture at 280MSa/s?

The 25000-count display resolution and 50MHz bandwidth constrain the visible detail before the sampling rate becomes the bottleneck.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.