Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 60mm square case fan with ball bearing and two-wire connector

Zyvpee

Zyvpee AD0612HB-A70GL 60mm 12V 0.23A 2-wire case fan

SKU CH-1ZMQ-8XZ21

A 60 mm ball-bearing case fan running at 2000-2499 RPM with a 2-wire 12 V 0.23 A connection

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM2000-2499 RPM
  • Power Connector2 Wires
  • ColorBlack
  • Efficient cooling from 2000–2499 RPM operation
  • Low 0.23 A draw keeps power use minimal
  • Ball bearing design extends service life
  • Compact 60 mm × 25 mm frame fits tight cases
  • Simple 2-wire 12 V connection for quick install

Compact 60mm case fan for tight builds

The Zyvpee AD0612HB-A70GL is a 60 by 25 millimetre DC fan designed for cases with limited mounting space. It runs on 12 volts and draws 0.23 amps through a two-wire power connector. The black frame carries no lighting, making it suitable for stealthy or professional systems. Ball-bearing construction supports continuous operation in standard chassis positions.

Replaces 60mm sleeve-bearing fans when noise

A two-wire 60mm fan with sleeve bearings is the typical predecessor; the ball bearing here reduces wear and keeps acoustic output steadier over time. The 2000 to 2499 RPM range delivers a noticeable airflow increase without moving to a larger frame. The jump is worth it when the existing mount cannot accept a bigger diameter but the thermal headroom has become tight.

Fits any 60mm mounting pattern with two-pin headers

The 60 by 25 millimetre footprint aligns with standard 60mm screw holes, so no adapter brackets are required. A two-pin motherboard or fan-controller header supplies power; speed is voltage-dependent because no PWM wire is present. The slim profile leaves clearance for side-panel cables or low-profile heatsinks directly above the fan.

Kohokohdat

  • Efficient cooling from 2000–2499 RPM operation
  • Low 0.23 A draw keeps power use minimal
  • Ball bearing design extends service life
  • Compact 60 mm × 25 mm frame fits tight cases
  • Simple 2-wire 12 V connection for quick install

Tekniset tiedot

BrandZyvpee
SeriesAD0612HB-A70GL
ModelAD0612HB-A70GL
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM2000-2499 RPM
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesDC Case Fan
Dimensions60*25mm

Kysymyksiä tästä tuotteesta

Will the 60 mm by 25 mm frame fit my case fan slot?

The fan measures 60 mm square and 25 mm thick, matching the standard 6025 mounting pattern used in many small-form-factor cases and server chassis.

How do I connect the two-wire lead to a 12 V header, and what mistake should I avoid?

Plug the red wire to the 12 V pin and the black wire to ground; reversing them will prevent the fan from spinning because the motor is polarity-sensitive.

When should I expect to replace the ball-bearing fan?

Ball bearings typically last several years at 2000–2499 RPM; plan a replacement if you hear increased noise or feel vibration from the rotor.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.