Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 60mm square case fan with ball bearing and two-wire connector

Zyvpee

Zyvpee AD0612HB-A70GL 60mm 12V 0.23A 2-wire case fan

SKU CH-1ZMQ-8XZ21

A 60 mm ball-bearing case fan running at 2000-2499 RPM with a 2-wire 12 V 0.23 A connection

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • RPM2000-2499 RPM
  • Power Connector2 Wires
  • ColorBlack
  • Efficient cooling from 2000–2499 RPM operation
  • Low 0.23 A draw keeps power use minimal
  • Ball bearing design extends service life
  • Compact 60 mm × 25 mm frame fits tight cases
  • Simple 2-wire 12 V connection for quick install

Compact 60mm case fan for tight builds

The Zyvpee AD0612HB-A70GL is a 60 by 25 millimetre DC fan designed for cases with limited mounting space. It runs on 12 volts and draws 0.23 amps through a two-wire power connector. The black frame carries no lighting, making it suitable for stealthy or professional systems. Ball-bearing construction supports continuous operation in standard chassis positions.

Replaces 60mm sleeve-bearing fans when noise

A two-wire 60mm fan with sleeve bearings is the typical predecessor; the ball bearing here reduces wear and keeps acoustic output steadier over time. The 2000 to 2499 RPM range delivers a noticeable airflow increase without moving to a larger frame. The jump is worth it when the existing mount cannot accept a bigger diameter but the thermal headroom has become tight.

Fits any 60mm mounting pattern with two-pin headers

The 60 by 25 millimetre footprint aligns with standard 60mm screw holes, so no adapter brackets are required. A two-pin motherboard or fan-controller header supplies power; speed is voltage-dependent because no PWM wire is present. The slim profile leaves clearance for side-panel cables or low-profile heatsinks directly above the fan.

Puncte forte

  • Efficient cooling from 2000–2499 RPM operation
  • Low 0.23 A draw keeps power use minimal
  • Ball bearing design extends service life
  • Compact 60 mm × 25 mm frame fits tight cases
  • Simple 2-wire 12 V connection for quick install

Specificații

BrandZyvpee
SeriesAD0612HB-A70GL
ModelAD0612HB-A70GL
TypeCase Fan
CompatibilityCase
Bearing TypeBall
RPM2000-2499 RPM
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesDC Case Fan
Dimensions60*25mm

Întrebări despre acest articol

Will the 60 mm by 25 mm frame fit my case fan slot?

The fan measures 60 mm square and 25 mm thick, matching the standard 6025 mounting pattern used in many small-form-factor cases and server chassis.

How do I connect the two-wire lead to a 12 V header, and what mistake should I avoid?

Plug the red wire to the 12 V pin and the black wire to ground; reversing them will prevent the fan from spinning because the motor is polarity-sensitive.

When should I expect to replace the ball-bearing fan?

Ball bearings typically last several years at 2000–2499 RPM; plan a replacement if you hear increased noise or feel vibration from the rotor.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.