Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 120mm square case fan, 38mm thick, two-wire DC12V .87A ball bearing non-LED

Zyvpee

Zyvpee AD1212LB-F91GP 120mm 38mm DC12V .87A 2-wire case fan

SKU CH-0YZS-2TGB6

A 120 mm by 38 mm case fan with ball bearing and 2-wire DC12V .87A power

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 wires
  • ColorBlack
  • LEDNon-LED
  • Reliable long-life cooling from dual ball-bearing design
  • High 0.87 A current delivers strong airflow for dense builds
  • 38 mm thick frame moves more air than slim fans
  • Simple 2-wire power connection fits any 12 V header
  • Compact 120 mm square footprint suits standard case mounts

120 mm 38 mm DC case fan

The Zyvpee AD1212LB-F91GP is a 120 mm square frame fan with a 38 mm thickness. It runs on 12 V DC power and draws 0.87 A through a two-wire lead. The unit uses a ball bearing and has no LED lighting. It is suited for cases that accept a 38 mm thick 120 mm fan.

Two-wire DC power limit

A two-wire connection supplies constant voltage without a speed signal or PWM control. The fan will run at full speed whenever power is applied. Builders who need motherboard fan-curve management or RPM monitoring cannot use this connector type. A separate fan controller or voltage reducer is required for speed adjustment.

0.87 A current draw

The 0.87 A rating determines whether a fan header or controller can supply enough current. Headers rated below this value may trip protection or run the fan unreliably. Check the header specification before installation.

Kohokohdat

  • Reliable long-life cooling from dual ball-bearing design
  • High 0.87 A current delivers strong airflow for dense builds
  • 38 mm thick frame moves more air than slim fans
  • Simple 2-wire power connection fits any 12 V header
  • Compact 120 mm square footprint suits standard case mounts

Tekniset tiedot

SeriesAD1212LB-F91GP
ModelAD1212LB-F91GP
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions120mm*120mm*38mm

Kysymyksiä tästä tuotteesta

Is the AD1212LB-F91GP the only version of this 120 mm × 38 mm fan, or are there other speeds or colours to pick from?

The listing shows a single model, AD1212LB-F91GP, in black with no LED and a two-wire DC connector. No alternative speeds, colours or connector types are offered for this SKU.

What does the 0.87 A current draw mean when the fan is running inside my case?

At 12 V the fan pulls 0.87 A, so the motherboard header or fan controller must be rated for at least that current per channel to avoid overload.

The fan uses a two-wire power connector — what control does that give me in practice?

A two-wire DC connection provides power only; speed is fixed at full voltage unless you add an external voltage reducer or PWM controller.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.