Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 120mm square case fan, 38mm thick, two-wire DC12V .87A ball bearing non-LED

Zyvpee

Zyvpee AD1212LB-F91GP 120mm 38mm DC12V .87A 2-wire case fan

SKU CH-0YZS-2TGB6

A 120 mm by 38 mm case fan with ball bearing and 2-wire DC12V .87A power

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 wires
  • ColorBlack
  • LEDNon-LED
  • Reliable long-life cooling from dual ball-bearing design
  • High 0.87 A current delivers strong airflow for dense builds
  • 38 mm thick frame moves more air than slim fans
  • Simple 2-wire power connection fits any 12 V header
  • Compact 120 mm square footprint suits standard case mounts

120 mm 38 mm DC case fan

The Zyvpee AD1212LB-F91GP is a 120 mm square frame fan with a 38 mm thickness. It runs on 12 V DC power and draws 0.87 A through a two-wire lead. The unit uses a ball bearing and has no LED lighting. It is suited for cases that accept a 38 mm thick 120 mm fan.

Two-wire DC power limit

A two-wire connection supplies constant voltage without a speed signal or PWM control. The fan will run at full speed whenever power is applied. Builders who need motherboard fan-curve management or RPM monitoring cannot use this connector type. A separate fan controller or voltage reducer is required for speed adjustment.

0.87 A current draw

The 0.87 A rating determines whether a fan header or controller can supply enough current. Headers rated below this value may trip protection or run the fan unreliably. Check the header specification before installation.

Přednosti

  • Reliable long-life cooling from dual ball-bearing design
  • High 0.87 A current delivers strong airflow for dense builds
  • 38 mm thick frame moves more air than slim fans
  • Simple 2-wire power connection fits any 12 V header
  • Compact 120 mm square footprint suits standard case mounts

Specifikace

SeriesAD1212LB-F91GP
ModelAD1212LB-F91GP
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions120mm*120mm*38mm

Otázky k tomuto produktu

Is the AD1212LB-F91GP the only version of this 120 mm × 38 mm fan, or are there other speeds or colours to pick from?

The listing shows a single model, AD1212LB-F91GP, in black with no LED and a two-wire DC connector. No alternative speeds, colours or connector types are offered for this SKU.

What does the 0.87 A current draw mean when the fan is running inside my case?

At 12 V the fan pulls 0.87 A, so the motherboard header or fan controller must be rated for at least that current per channel to avoid overload.

The fan uses a two-wire power connector — what control does that give me in practice?

A two-wire DC connection provides power only; speed is fixed at full voltage unless you add an external voltage reducer or PWM controller.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.