Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 80mm case fan with 4-pin connector

Zyvpee

Zyvpee DS08025R12U P195 P158 80mm 4-pin case fan

SKU CH-NM5F-WYYZV

80 mm ball-bearing case fan with 4-pin PWM control for Dell XPS 8000 CPU cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • Ball bearing reduces wear for longer service life
  • 12 V, 0.7 A four-pin PWM control enables precise speed adjustment
  • 80 mm by 25 mm frame fits Dell XPS 8000 chassis
  • Non-LED black design keeps interior lighting clean
  • 4-wire connector supports motherboard monitoring and regulation

80mm 4-pin case fan for Dell XPS 8000

The Zyvpee DS08025R12U P158 is an 80 by 25 millimetre case fan built for CPU cooling duties. It runs on 12 volts at 0.7 amps through a 4-pin power connector and uses a ball bearing for long service life. The black non-LED frame keeps the build looking clean.

Suits Dell XPS 8000 owners replacing 1VVH1 cooler

This fan matches the 1VVH1 part used in the Dell XPS 8000 so it fits the original mounting points and connector. Builders working on other chassis or needing a different voltage should look elsewhere because the dimensions and pinout are fixed to that platform.

4-pin connector decides compatibility

The 4-pin power connector is the single specification that determines whether this fan will work in your system. If your motherboard or fan header only accepts 3-pin plugs this unit will not connect without an adapter.

Kohokohdat

  • Ball bearing reduces wear for longer service life
  • 12 V, 0.7 A four-pin PWM control enables precise speed adjustment
  • 80 mm by 25 mm frame fits Dell XPS 8000 chassis
  • Non-LED black design keeps interior lighting clean
  • 4-wire connector supports motherboard monitoring and regulation

Tekniset tiedot

BrandZyvpee
SeriesDS08025R12U P195
ModelDS08025R12U P158
TypeCase Fan
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions80*25MM

Kysymyksiä tästä tuotteesta

Will the 4-pin connector let my Dell XPS 8000 motherboard control the fan speed automatically?

Yes, the 4-pin PWM connector allows the motherboard to regulate speed based on CPU temperature, matching the original 1VVH1 specification.

How can I confirm the DS08025R12U is spinning at the correct rate after installation?

Check the fan RPM reading in the BIOS hardware monitor or Dell diagnostic utility; it should report a steady value that rises with CPU load.

Does the package include mounting screws for the 80 mm frame, or must I reuse the original Dell hardware?

The fan ships as a bare 80x25 mm unit; you will need to reuse the four screws from the original XPS 8000 cooler or source standard M3 screws separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.