Zyvpee
Zyvpee DS08025R12U P195 P158 80mm 4-pin case fan
80 mm ball-bearing case fan with 4-pin PWM control for Dell XPS 8000 CPU cooling
- TypeCase Fan
- Bearing TypeBall
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPU Cooling
- Ball bearing reduces wear for longer service life
- 12 V, 0.7 A four-pin PWM control enables precise speed adjustment
- 80 mm by 25 mm frame fits Dell XPS 8000 chassis
- Non-LED black design keeps interior lighting clean
- 4-wire connector supports motherboard monitoring and regulation
80mm 4-pin case fan for Dell XPS 8000
The Zyvpee DS08025R12U P158 is an 80 by 25 millimetre case fan built for CPU cooling duties. It runs on 12 volts at 0.7 amps through a 4-pin power connector and uses a ball bearing for long service life. The black non-LED frame keeps the build looking clean.
Suits Dell XPS 8000 owners replacing 1VVH1 cooler
This fan matches the 1VVH1 part used in the Dell XPS 8000 so it fits the original mounting points and connector. Builders working on other chassis or needing a different voltage should look elsewhere because the dimensions and pinout are fixed to that platform.
4-pin connector decides compatibility
The 4-pin power connector is the single specification that determines whether this fan will work in your system. If your motherboard or fan header only accepts 3-pin plugs this unit will not connect without an adapter.
أبرز المميزات
- Ball bearing reduces wear for longer service life
- 12 V, 0.7 A four-pin PWM control enables precise speed adjustment
- 80 mm by 25 mm frame fits Dell XPS 8000 chassis
- Non-LED black design keeps interior lighting clean
- 4-wire connector supports motherboard monitoring and regulation
المواصفات
| Brand | Zyvpee |
|---|---|
| Series | DS08025R12U P195 |
| Model | DS08025R12U P158 |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling |
| Dimensions | 80*25MM |
أسئلة حول هذا المنتج
Will the 4-pin connector let my Dell XPS 8000 motherboard control the fan speed automatically?
Yes, the 4-pin PWM connector allows the motherboard to regulate speed based on CPU temperature, matching the original 1VVH1 specification.
How can I confirm the DS08025R12U is spinning at the correct rate after installation?
Check the fan RPM reading in the BIOS hardware monitor or Dell diagnostic utility; it should report a steady value that rises with CPU load.
Does the package include mounting screws for the 80 mm frame, or must I reuse the original Dell hardware?
The fan ships as a bare 80x25 mm unit; you will need to reuse the four screws from the original XPS 8000 cooler or source standard M3 screws separately.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



