Zyvpee
Zyvpee EFB0412VHD 4020 12V .18A 3 Pin case fan
A 40 mm ball-bearing case fan running at 12 V and 0.18 A with a three-pin connector
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Dimensions40*20mm
- 40 mm by 20 mm frame fits tight spaces
- 12 V 0.18 A draw keeps power use low
- Ball bearing design extends service life
- Three-pin connector enables speed monitoring
- Non-LED black finish suits stealth builds
Zyvpee EFB0412VHD 4020 12V Case Fan
The Zyvpee EFB0412VHD is a 40 by 20 millimetre case fan that runs on twelve volts direct current and draws zero point one eight amperes. It uses a three pin power connector and a ball bearing for shaft support. The frame is black and the unit has no LED illumination.
Suits tight 40mm mounts needing 12V three pin power
This fan fits devices that accept a 40 by 20 millimetre footprint and a three pin header at twelve volts. Builders who need a larger frame, a different voltage, a four pin PWM connector or integrated lighting should look at other models.
Deciding specification is the 40 by 20 millimetre
The physical size of forty by twenty millimetres determines whether the fan can be mounted in the target chassis or device. If the available opening differs from these dimensions the fan will not fit.
Kohokohdat
- 40 mm by 20 mm frame fits tight spaces
- 12 V 0.18 A draw keeps power use low
- Ball bearing design extends service life
- Three-pin connector enables speed monitoring
- Non-LED black finish suits stealth builds
Tekniset tiedot
| Brand | 3ccooler.com |
|---|---|
| Series | EFB0412VHD -F00 |
| Model | EFB0412VHD |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Dimensions | 40*20mm |
Kysymyksiä tästä tuotteesta
How much noise and heat does the 40 mm ball-bearing fan produce when it runs continuously?
The 40*20 mm ball-bearing design runs on 12 V at 0.18 A, so it stays cool and quiet enough for constant duty in a switch or router chassis.
What connector must my board already have to plug in this 3-pin 12 V fan?
A standard three-pin 12 V header spaced for 40 mm mounting holes is all that is required; no extra adapters or controllers are needed.
Will the EFB0412VHD fit the same 40 mm cut-outs used by older 4020 fans in my existing gear?
Yes — the 40*20 mm frame and three-pin wiring match the legacy 4020 footprint, so it drops into the same openings without modification.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001049BTC
Varastossa