Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small black 40 by 20 millimetre case fan with three pin connector

Zyvpee

Zyvpee EFB0412VHD 4020 12V .18A 3 Pin case fan

SKU CH-BFX8-XDDV0

A 40 mm ball-bearing case fan running at 12 V and 0.18 A with a three-pin connector

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Dimensions40*20mm
  • 40 mm by 20 mm frame fits tight spaces
  • 12 V 0.18 A draw keeps power use low
  • Ball bearing design extends service life
  • Three-pin connector enables speed monitoring
  • Non-LED black finish suits stealth builds

Zyvpee EFB0412VHD 4020 12V Case Fan

The Zyvpee EFB0412VHD is a 40 by 20 millimetre case fan that runs on twelve volts direct current and draws zero point one eight amperes. It uses a three pin power connector and a ball bearing for shaft support. The frame is black and the unit has no LED illumination.

Suits tight 40mm mounts needing 12V three pin power

This fan fits devices that accept a 40 by 20 millimetre footprint and a three pin header at twelve volts. Builders who need a larger frame, a different voltage, a four pin PWM connector or integrated lighting should look at other models.

Deciding specification is the 40 by 20 millimetre

The physical size of forty by twenty millimetres determines whether the fan can be mounted in the target chassis or device. If the available opening differs from these dimensions the fan will not fit.

Přednosti

  • 40 mm by 20 mm frame fits tight spaces
  • 12 V 0.18 A draw keeps power use low
  • Ball bearing design extends service life
  • Three-pin connector enables speed monitoring
  • Non-LED black finish suits stealth builds

Specifikace

Brand3ccooler.com
SeriesEFB0412VHD -F00
ModelEFB0412VHD
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
Dimensions40*20mm

Otázky k tomuto produktu

How much noise and heat does the 40 mm ball-bearing fan produce when it runs continuously?

The 40*20 mm ball-bearing design runs on 12 V at 0.18 A, so it stays cool and quiet enough for constant duty in a switch or router chassis.

What connector must my board already have to plug in this 3-pin 12 V fan?

A standard three-pin 12 V header spaced for 40 mm mounting holes is all that is required; no extra adapters or controllers are needed.

Will the EFB0412VHD fit the same 40 mm cut-outs used by older 4020 fans in my existing gear?

Yes — the 40*20 mm frame and three-pin wiring match the legacy 4020 footprint, so it drops into the same openings without modification.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.