Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 60 by 25 mm maglev case fan three pin connector

Zyvpee

Zyvpee KDE1206PTV4 60x25mm 3-pin maglev case fan

SKU CH-NS8F-JM7QD

A 60 x 25 mm maglev CPU cooler fan with a 3-pin connector running under 1600 RPM at 12 V and 0.8 W

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Maglev bearing reduces friction for longer life
  • 12 V, 0.8 W draw keeps power use low
  • Three-pin connector fits standard motherboard headers
  • 60 × 25 mm frame suits compact CPU coolers
  • Under 1600 RPM limits noise while moving air

Compact CPU cooler fan for tight builds

The Zyvpee KDE1206PTV4 is a 60x25mm case fan designed for CPU cooler compatibility. Its small footprint suits compact chassis or low-profile heatsinks where larger fans cannot fit. The maglev bearing reduces friction for quieter operation at speed. It targets builders needing focused airflow in restricted spaces.

3-pin voltage control limits speed precision

The three-pin connector adjusts fan speed through voltage variation rather than PWM signalling. This means the motherboard cannot command exact duty cycles, so minimum RPM may be higher than with four-pin control. Maximum speed is rated below 1600 RPM, drawing 0.8W at 12V. Speed reporting is supported, but fine-grained curves are not.

Maglev bearing and fixed mounting imply low

The magnetic levitation bearing eliminates physical contact between shaft and sleeve, reducing wear and noise over time. Black frame and blades carry no LED lighting, keeping the appearance neutral inside any case. Standard 60mm screw holes allow direct mounting to compatible heatsinks or chassis points. No extra brackets or adapters are mentioned.

Kohokohdat

  • Maglev bearing reduces friction for longer life
  • 12 V, 0.8 W draw keeps power use low
  • Three-pin connector fits standard motherboard headers
  • 60 × 25 mm frame suits compact CPU coolers
  • Under 1600 RPM limits noise while moving air

Tekniset tiedot

BrandZyvpee
SeriesKDE1206PTV4
ModelKDE1206PTV4
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions60*25MM

Kysymyksiä tästä tuotteesta

Which RPM range suits a compact CPU cooler?

The fan spins at up to 1600 RPM, providing focused airflow for 60 mm coolers in tight builds.

What does 0.8 W at 12 V mean for daily use?

It draws only 0.8 W from a 12 V header, so it adds minimal load to the motherboard fan circuit.

How does the 3-pin connector control speed?

The 3-pin header allows voltage-based RPM adjustment; the board varies voltage to change fan speed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.