Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 60 by 25 mm maglev case fan three pin connector

Zyvpee

Zyvpee KDE1206PTV4 60x25mm 3-pin maglev case fan

SKU CH-NS8F-JM7QD

A 60 x 25 mm maglev CPU cooler fan with a 3-pin connector running under 1600 RPM at 12 V and 0.8 W

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector3 Pin
  • ColorBlack
  • Maglev bearing reduces friction for longer life
  • 12 V, 0.8 W draw keeps power use low
  • Three-pin connector fits standard motherboard headers
  • 60 × 25 mm frame suits compact CPU coolers
  • Under 1600 RPM limits noise while moving air

Compact CPU cooler fan for tight builds

The Zyvpee KDE1206PTV4 is a 60x25mm case fan designed for CPU cooler compatibility. Its small footprint suits compact chassis or low-profile heatsinks where larger fans cannot fit. The maglev bearing reduces friction for quieter operation at speed. It targets builders needing focused airflow in restricted spaces.

3-pin voltage control limits speed precision

The three-pin connector adjusts fan speed through voltage variation rather than PWM signalling. This means the motherboard cannot command exact duty cycles, so minimum RPM may be higher than with four-pin control. Maximum speed is rated below 1600 RPM, drawing 0.8W at 12V. Speed reporting is supported, but fine-grained curves are not.

Maglev bearing and fixed mounting imply low

The magnetic levitation bearing eliminates physical contact between shaft and sleeve, reducing wear and noise over time. Black frame and blades carry no LED lighting, keeping the appearance neutral inside any case. Standard 60mm screw holes allow direct mounting to compatible heatsinks or chassis points. No extra brackets or adapters are mentioned.

Puncte forte

  • Maglev bearing reduces friction for longer life
  • 12 V, 0.8 W draw keeps power use low
  • Three-pin connector fits standard motherboard headers
  • 60 × 25 mm frame suits compact CPU coolers
  • Under 1600 RPM limits noise while moving air

Specificații

BrandZyvpee
SeriesKDE1206PTV4
ModelKDE1206PTV4
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions60*25MM

Întrebări despre acest articol

Which RPM range suits a compact CPU cooler?

The fan spins at up to 1600 RPM, providing focused airflow for 60 mm coolers in tight builds.

What does 0.8 W at 12 V mean for daily use?

It draws only 0.8 W from a 12 V header, so it adds minimal load to the motherboard fan circuit.

How does the 3-pin connector control speed?

The 3-pin header allows voltage-based RPM adjustment; the board varies voltage to change fan speed.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.