Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small black blower fan 50 by 15 mm two wire

Zyvpee

Zyvpee MF50151VX-B00C-A99 50x15mm 12V 2.04W blower case fan

SKU CH-NC0A-HQD49

Compact 50x15mm DC blower fan with maglev bearing runs on 12V at 2.04W for CPU cooler airflow

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • Power Connector2 Wires
  • ColorBlack
  • LEDNon-LED
  • Compact blower design fits tight 50 x 15 mm spaces
  • Maglev bearing reduces friction for quieter operation
  • 12 V 2.04 W draw keeps power use low
  • Two-wire connector simplifies installation in CPU coolers
  • Non-LED black finish suits professional builds

Compact 50 x 15 mm blower fan

The Zyvpee MF50151VX-B00C-A99 is a 12 V DC blower measuring 50 by 15 millimetres and rated at 2.04 W. It uses a maglev bearing and a two-wire power connector for direct current operation. The black, non-LED housing is designed for tight spaces such as projector enclosures or small-form-factor CPU coolers.

Builders needing focused airflow in a slim profile

This fan suits projects that require a narrow blower rather than a standard axial cooler. Systems that need PWM speed control, RGB lighting or larger mounting patterns should look elsewhere. The two-wire design provides constant voltage operation without automatic speed regulation.

12 V 2.04 W power rating

The 12 volt, 2.04 watt specification determines whether the fan matches the power budget and voltage rail of the target device. Verify that the host board supplies 12 V on a two-pin header before installation.

Kohokohdat

  • Compact blower design fits tight 50 x 15 mm spaces
  • Maglev bearing reduces friction for quieter operation
  • 12 V 2.04 W draw keeps power use low
  • Two-wire connector simplifies installation in CPU coolers
  • Non-LED black finish suits professional builds

Tekniset tiedot

SeriesMF50151VX-B00C-A99
ModelMF50151VX-B00C-A99
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesDC Blower

Kysymyksiä tästä tuotteesta

Does this blower fan need a 12 V two-wire header on my motherboard or controller?

Yes, it runs on 12 V and uses a simple two-wire power connector, so your board or fan controller must provide a matching 12 V two-pin header.

Will the maglev bearing and 50×15 mm frame fit the same mounting holes as my existing 5015-size blower?

The fan follows the 5015 form factor — 50 mm by 15 mm — so it aligns with standard 5015 mounting holes used on many CPU coolers and projectors.

How can I confirm the fan is spinning correctly once installed?

With power applied, the maglev blower should start immediately and move air through its focused outlet; you can feel the directed airflow or watch the rotor through the frame openings.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.