暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Zyvpee

Zyvpee MF50151VX-B00C-A99 50x15mm 12V 2.04W blower case fan

SKU CH-NC0A-HQD49

Compact 50x15mm DC blower fan with maglev bearing runs on 12V at 2.04W for CPU cooler airflow

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • Power Connector2 Wires
  • ColorBlack
  • LEDNon-LED
  • Compact blower design fits tight 50 x 15 mm spaces
  • Maglev bearing reduces friction for quieter operation
  • 12 V 2.04 W draw keeps power use low
  • Two-wire connector simplifies installation in CPU coolers
  • Non-LED black finish suits professional builds

Compact 50 x 15 mm blower fan

The Zyvpee MF50151VX-B00C-A99 is a 12 V DC blower measuring 50 by 15 millimetres and rated at 2.04 W. It uses a maglev bearing and a two-wire power connector for direct current operation. The black, non-LED housing is designed for tight spaces such as projector enclosures or small-form-factor CPU coolers.

Builders needing focused airflow in a slim profile

This fan suits projects that require a narrow blower rather than a standard axial cooler. Systems that need PWM speed control, RGB lighting or larger mounting patterns should look elsewhere. The two-wire design provides constant voltage operation without automatic speed regulation.

12 V 2.04 W power rating

The 12 volt, 2.04 watt specification determines whether the fan matches the power budget and voltage rail of the target device. Verify that the host board supplies 12 V on a two-pin header before installation.

特長

  • Compact blower design fits tight 50 x 15 mm spaces
  • Maglev bearing reduces friction for quieter operation
  • 12 V 2.04 W draw keeps power use low
  • Two-wire connector simplifies installation in CPU coolers
  • Non-LED black finish suits professional builds

仕様

SeriesMF50151VX-B00C-A99
ModelMF50151VX-B00C-A99
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesDC Blower

この商品に関する質問

Does this blower fan need a 12 V two-wire header on my motherboard or controller?

Yes, it runs on 12 V and uses a simple two-wire power connector, so your board or fan controller must provide a matching 12 V two-pin header.

Will the maglev bearing and 50×15 mm frame fit the same mounting holes as my existing 5015-size blower?

The fan follows the 5015 form factor — 50 mm by 15 mm — so it aligns with standard 5015 mounting holes used on many CPU coolers and projectors.

How can I confirm the fan is spinning correctly once installed?

With power applied, the maglev blower should start immediately and move air through its focused outlet; you can feel the directed airflow or watch the rotor through the frame openings.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。