NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
A-Tech
16 GB DDR3L 1333 MHz ECC registered 2Rx4 server DIMM for Kingston HP and KVR systems
This 16GB DDR3L module runs at 1333MHz with CL9 latency and 1.35V low voltage. It is a registered ECC DIMM built for server and workstation systems that require error correction and signal buffering. The 2Rx4 rank configuration uses major brand chips for stable operation in multi-module environments.
The DDR3L standard tops out at 1333MHz on this module, so faster DDR3 speeds are not supported. Registered DIMMs add a clock cycle of latency and require a motherboard chipset that enables registered memory; consumer desktop boards will not recognise the module. Voltage is fixed at 1.35V and cannot be raised to 1.5V without exceeding spec.
The 240-pin DIMM seats in a standard DDR3 server slot; align the notch and press until the latches click. Systems that do not support registered ECC memory will fail to post or show no usable capacity. Mixing registered and unbuffered modules, or exceeding the platform's rank limit per channel, are the usual causes of instability.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
This listing is a single 16 GB module; the 48 GB and 64 GB references are multi-module Kingston kits that this part replaces, so select based on how many slots you plan to fill.
The module operates at 1333 MT/s with CL9 timing at 1.35 V, delivering the standard DDR3L 1333 data rate when the platform runs memory at that speed.
It fits 240-pin DDR3 DIMM sockets, but the registered ECC design requires a server or workstation chipset that supports registered modules; consumer boards typically do not.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?