A-Tech
A-Tech 4GB DDR3 1333 PC3-10600 DIMM 1Rx8 desktop RAM
4GB DDR3 1333 PC3-10600 240-pin DIMM module for desktop memory upgrades
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- Tested Frequency1333
- CAS LatencyCL9
- Voltage1.50V
- ECCNo
- 4GB capacity adds multitasking headroom for everyday desktop workloads
- DDR3 1333 speed matches PC3-10600 spec for reliable data throughput
- CL9 latency at 1.50V delivers stable timing without extra voltage
- 240-pin unbuffered DIMM fits standard desktop slots directly
- Major-brand chips tested for dependable long-term operation
4 GB DDR3 1333 PC3-10600 DIMM
This module provides 4 GB of DDR3 memory at 1333 MHz with CL9 latency and 1.50 V operation. It uses a standard 240-pin DIMM form factor and is unbuffered non-ECC. The part is designed for desktop systems and uses major-brand chips.
Suits owners of compatible desktops needing a 4 GB
It matches Kingston part numbers KVR13N9S8H/4, KTH9600BS/4G, KFJ9900S/4G, KAC-VR313S/4G and D51264J90S. Systems requiring ECC, registered modules, different voltages or higher capacities should choose a different module.
DDR3 1333 PC3-10600 interface determines
The motherboard must accept DDR3 DIMMs at 1333 MHz (PC3-10600) with 1.50 V unbuffered non-ECC signalling. If the board specifies a different speed, voltage or memory type, this module will not work.
נקודות עיקריות
- 4GB capacity adds multitasking headroom for everyday desktop workloads
- DDR3 1333 speed matches PC3-10600 spec for reliable data throughput
- CL9 latency at 1.50V delivers stable timing without extra voltage
- 240-pin unbuffered DIMM fits standard desktop slots directly
- Major-brand chips tested for dependable long-term operation
מפרט טכני
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| Tested Frequency | 1333 |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
שאלות על הפריט הזה
Will this 240-pin DDR3 DIMM fit my desktop motherboard?
Yes — the module uses the standard 240-pin DDR3 DIMM form factor, so it fits any desktop board with a DDR3 slot.
What is the common mistake when seating this 1.50 V DDR3 1333 module?
Not pressing firmly until both side clips click; the module must sit fully vertical in the slot for reliable contact.
When should I replace this 4 GB CL9 DDR3 stick?
Replace it only if memory diagnostics report errors or the system becomes unstable; otherwise the module has no wear-out schedule.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
OWC 128GB (2x64GB) DDR5 4800 CL40 ECC RDIMM Dell PowerEdge
- 128GB (2 x 64GB)
- 288-Pin DDR5 ECC RD…
OWC 128GB DDR5 4800 PC5-38400 CL40 4Rx4 288-pin 1.1V ECC Registered RDIMM for Dell PowerEdge XE9680
- 128GB
- 288-Pin DDR5 ECC RD…
OWC 1TB (8x128GB) DDR5 4800 CL40 ECC Registered RDIMM memory upgrade
- 1TB (8 x 128GB)
- 288-Pin DDR5 ECC RD…



