NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
A-Tech
4GB DDR4 2400MHz CL17 1.2V 288-pin desktop memory module for system upgrades
This single 4GB DDR4 module runs at 2400MHz with CL17 latency and 1.2V operation. It uses a 288-pin unbuffered DIMM form factor built with major brand chips. The kit is designed as a direct replacement for Dell part numbers A9321910 and SNPGTWW1C/4G. It targets desktop users who need a straightforward capacity increase for everyday workloads.
Standard 1.2V DDR4 voltage keeps power draw low during typical desktop tasks. The unbuffered design adds no extra electrical load beyond the memory chips themselves. No active cooling is required and the module runs silently inside a normal case airflow path. Heat output stays within normal DDR4 limits for a 4GB stick at this frequency.
The package contains only the memory module itself with no extra cables, brackets or software utilities. Installation is a simple DIMM slot insertion followed by an automatic BIOS detection at 2400MHz. No driver downloads or configuration tools are needed to enable the rated speed. The lifetime warranty and US-based technical support cover the module after installation.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Speed | DDR4 2400 (PC4 19200) |
| Tested Frequency | 2400 |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Yes, this module is a direct replacement for Dell part numbers A9321910 and SNPGTWW1C/4G and uses the standard 288-pin DIMM form factor.
This module operates at the standard DDR4 voltage of 1.20V, matching the requirement for 1.2V DDR4 motherboards.
The module is rated at 2400MHz with a CAS latency of 17 and runs at standard JEDEC timings without needing XMP or manual BIOS changes.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?