NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
A-Tech
8GB DDR4 2666MHz ECC unbuffered UDIMM with CL19 latency and 1.2V operation for server and workstation upgrades
This 8GB DDR4 2666MHz ECC unbuffered DIMM is built for server and workstation systems that require error-correcting memory. It operates at 1.2V with a CL19 latency and a single-rank 1Rx8 organisation. The module uses major-brand chips and is tested for dependable operation in compatible platforms.
The DDR4 2666 (PC4-21300) interface sets the maximum data rate and the 288-pin DIMM form factor determines physical fit. Systems that only support lower DDR4 speeds will down-clock the module, while boards limited to registered DIMMs cannot accept this unbuffered design. The 1.2V standard voltage is fixed for DDR4 and cannot be adjusted on this part.
The single specification that determines whether this module works is the ECC unbuffered (UDIMM) designation. Servers or workstations that require registered (RDIMM) or load-reduced (LRDIMM) memory will not accept it, and consumer boards without ECC support cannot use the error-correction feature. Verify the motherboard manual calls for DDR4 ECC UDIMM before purchase.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Kingston |
| Model | KSM26ES8/8ME |
| Capacity | 8GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Features | KSM26ES8/8ME |
This listing is a single 8GB module; add more identical sticks to reach the total capacity your motherboard supports.
The module runs at DDR4 2666 (PC4-21300) with CL19 latency at 1.20V, delivering that bandwidth if the platform supports it.
Yes, it uses the 288-pin DDR4 DIMM form factor and ECC unbuffered signalling used by many server and workstation platforms.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?