SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 $
0.0050176BTC
במלאי
AddOn
AddOn AA579531-AM 32GB DDR4-2933MHz CL17 ECC Registered RDIMM 1.2V 288-pin
32 GB DDR4-2933 MHz registered ECC RDIMM with CL17 latency and 1.2 V operation
- SpeedDDR4 SDRAM
- CAS LatencyCL17
- ECCECC
- Buffered/RegisteredRegistered
- 32 GB capacity supports large server workloads
- DDR4-2933 MHz speed delivers high memory bandwidth
- CL17 CAS latency provides responsive data access
- ECC registered design detects and corrects memory errors
- 2 V operation reduces power consumption
32 GB DDR4-2933 ECC RDIMM
This 32 GB DDR4-2933MHz CL17 ECC Registered RDIMM is built for servers and workstations that require error-correcting memory. It suits administrators upgrading Dell-compatible platforms where registered modules are mandatory for stability.
Registered dual-rank x4 288-pin module
The module uses a 288-pin RDIMM form factor operating at 1.2 V with a registered dual-rank x4 organisation. This buffering reduces electrical load on the memory controller, allowing higher capacities per channel in multi-socket systems.
Verify registered ECC support and slot count
Before ordering, confirm your motherboard accepts DDR4 registered ECC RDIMMs and has free 288-pin slots. Systems limited to unbuffered non-ECC memory or lacking sufficient slots cannot use this module.
נקודות עיקריות
- 32 GB capacity supports large server workloads
- DDR4-2933 MHz speed delivers high memory bandwidth
- CL17 CAS latency provides responsive data access
- ECC registered design detects and corrects memory errors
- 2 V operation reduces power consumption
מפרט טכני
| Brand | AddOn |
|---|---|
| Model | AA579531-AM |
| Part Number | AA579531-AM |
| Speed | DDR4 SDRAM |
| CAS Latency | CL17 |
| ECC | ECC |
| Buffered/Registered | Registered |
| משקל משלוח | 0.23 kg |
| מידות האריזה | 203 × 152 × 51 mm |
שאלות על הפריט הזה
What data rate does the DDR4-2933MHz interface deliver in practice?
The module operates at 2933 MT/s, so peak bandwidth is capped at the DDR4-2933 standard rate.
Will the 288-pin RDIMM fit my server's memory slots?
It requires a standard 288-pin DDR4 RDIMM slot; the module is 32 GB, dual-rank x4, registered ECC, and runs at 1.2 V.
How do I install the AA579531-AM and what step is often missed?
Power down, open the chassis, align the notch with the 288-pin slot, press firmly until both retention clips click, then verify the BIOS recognises 32 GB at 2933 MHz CL17.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
