Brute Networks
Brute Networks 32GB DDR4-2933 2Rx4 ECC Registered RDIMM P12981-091
32 GB DDR4-2933 ECC registered server memory module with 2Rx4 organisation, 1.20 V operation and full HP compatibility
- Capacity32GB
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- Rank2Rx4
- ChipsetMajor Brand Chipset
- 32 GB capacity supports large server workloads
- DDR4-2933 speed delivers 23400 MT/s data rate
- ECC registered design protects data integrity
- Dual-rank 2Rx4 organisation increases memory density
- 20 V operation reduces power consumption
HP Compatible 32GB DDR4-2933 RDIMM
Brute Networks P12981-091-BN is a 32GB DDR4-2933 registered ECC module built to match HP part number P12981-091. It runs at 1.20V with a 2Rx4 organisation and PC4-23400 rating. The stick is new and carries a lifetime warranty from the supplier.
Suitable For And Not Suitable For
This module suits administrators upgrading or repairing HP servers that require DDR4-2933 registered ECC memory in a 32GB capacity. It is not suitable for systems that need unbuffered memory, non-ECC memory, speeds other than 2933 MT/s, or capacities other than 32GB per slot.
Deciding Specification
The registered ECC design with 2Rx4 architecture at 2933 MT/s is the single specification that determines compatibility; the motherboard and CPU must explicitly support registered DDR4 ECC at this speed and rank configuration.
נקודות עיקריות
- 32 GB capacity supports large server workloads
- DDR4-2933 speed delivers 23400 MT/s data rate
- ECC registered design protects data integrity
- Dual-rank 2Rx4 organisation increases memory density
- 20 V operation reduces power consumption
מפרט טכני
| Brand | HP |
|---|---|
| Capacity | 32GB |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
שאלות על הפריט הזה
Does my motherboard need DDR4 slots that accept registered ECC RDIMMs for this 32 GB module to work?
Yes, the module is a DDR4-2933 2Rx4 ECC Registered RDIMM, so the board must support registered ECC memory in the DDR4 form factor.
Can I run this 2Rx4 registered stick alongside older unbuffered non-ECC DDR4 DIMMs in the same server?
No, registered ECC RDIMMs cannot be mixed with unbuffered non-ECC DIMMs; all slots must use the same registered ECC type.
How do I confirm the module is running at the rated 2933 MT/s after installation?
Check the BIOS memory information or an OS tool such as dmidecode to verify the speed shows 2933 MT/s and the rank reads 2Rx4.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.



