Computer Memory Solutions
Computer Memory Solutions CM2566410600SOSRH 2GB DDR3 1333MHz SODIMM memory upgrade Lenovo Ideapad S10-3 S10-3C
2GB DDR3 1333MHz SODIMM module upgrades Lenovo IdeaPad S10-3 and S10-3C netbooks with CL7 timing
- Capacity2GB
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL7
- Timing7-7-7
- Voltage1.5V
- 2GB capacity expands Lenovo IdeaPad S10-3 memory
- 1333 MHz DDR3 speed matches system requirements
- CL7 latency supports responsive operation
- 204-pin SO-DIMM fits compatible laptop slots
- 5 V unbuffered design works with existing hardware
2GB DDR3 SODIMM for Lenovo Ideapad S10-3
This 2GB DDR3 1333MHz SODIMM module is built specifically for Lenovo Ideapad S10-3 and S10-3C notebooks. It uses a 204-pin SO-DIMM form factor with CL7 latency and operates at 1.5V. The single-rank, non-ECC unbuffered design matches the original memory specification for these netbook models.
Installation fits the single SODIMM slot
The notebook provides one memory socket, so this stick installs directly without pairing concerns. Align the notch on the 204-pin edge connector with the slot key, press down until the side clips lock. No BIOS update or jumper change is required. The only common issue is seating the module firmly enough on the first try; a loose fit will prevent the system from posting.
Check your current configuration before ordering
Verify the Ideapad model is the DDR3 variant of the S10-3 or S10-3C, as other revisions use different memory types. Confirm the single slot is free or that you are replacing the existing 2GB stick, because the platform maximum is 2GB. Ensure the installed module is also non-ECC unbuffered DDR3 1333MHz to avoid compatibility conflicts.
נקודות עיקריות
- 2GB capacity expands Lenovo IdeaPad S10-3 memory
- 1333 MHz DDR3 speed matches system requirements
- CL7 latency supports responsive operation
- 204-pin SO-DIMM fits compatible laptop slots
- 5 V unbuffered design works with existing hardware
מפרט טכני
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2566410600SOSRH |
| Capacity | 2GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL7 |
| Timing | 7-7-7 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Lenovo Ideapad S10-3, S10-3C |
| Package Content | 1 Memory RAM Stick |
שאלות על הפריט הזה
How can I verify the module is running at 1333 MHz and CL7 timings after installing it in my Lenovo Ideapad S10-3?
Open Task Manager or a tool like CPU-Z and confirm the memory tab shows 1333 MHz speed with 7-7-7 timings; the laptop should also boot normally and report 2 GB in system properties.
Does the package include anything besides the single 204-pin SODIMM stick, or do I need to buy tools or thermal pads separately?
The box contains only the 2 GB DDR3 SODIMM module; no screwdriver, thermal pad or extra components are supplied, and none are required for a standard notebook memory slot.
Should I choose this 2 GB CL7 module or look for a different capacity or latency for the S10-3C?
The S10-3 and S10-3C both support a maximum of 2 GB in a single slot, so this 2 GB CL7 kit is the highest capacity and fastest latency option listed for these models.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.



