אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Grey filament spool 1.75mm 750g

E3D Online

E3D Online spoolWorks EDGE Filament 1.75mm 750g Basalt Grey45 3d printers accessory

SKU CH-V6K0-EJSVN

PETG-based filament combines ABS toughness with PLA ease of printing, offering low warp, strong layer adhesion, and a glossy grey finish

  • ColorGray
  • TypeFilament
  • Recyclable PETG-based material reduces environmental impact
  • 750g spool provides ample filament for large prints
  • 75mm diameter fits most desktop 3D printers
  • Low-odour printing improves workspace comfort
  • Strong layer adhesion creates durable finished parts

EDGE Filament for FDM Printers

E3D spoolWorks EDGE is a PETG-based filament engineered to combine ABS-like toughness with PLA-like printability. It targets makers and professionals who need strong, dimensionally accurate parts without the warping or fumes associated with traditional ABS. The material delivers high layer adhesion and resilience for functional prototypes and end-use parts.

1.75 mm Diameter Compatibility

This spool uses the standard 1.75 mm diameter required by the vast majority of desktop FDM printers. Verify that your extruder and hotend accept this size before purchasing. The 750 g net weight provides sufficient material for medium-sized prints or multiple smaller jobs.

Low-Warp Printing Characteristics

EDGE is formulated for super-low contraction, minimising warp and enabling accurate overhangs and tight bridges without an actively heated chamber. It prints with no unpleasant fumes or odours and adheres to common bed surfaces using only a light gluestick application. The material’s managed viscosity and melt strength support clean, dimensionally stable results at typical PETG nozzle temperatures.

נקודות עיקריות

  • Recyclable PETG-based material reduces environmental impact
  • 750g spool provides ample filament for large prints
  • 75mm diameter fits most desktop 3D printers
  • Low-odour printing improves workspace comfort
  • Strong layer adhesion creates durable finished parts

מפרט טכני

BrandE3D
ModelEdge
ColorGray
TypeFilament

שאלות על הפריט הזה

What does the 1.75 mm diameter mean for my printer setup?

The 1.75 mm diameter matches the standard feed path on most desktop FDM printers, so the filament loads directly without adapter tubes or hardware changes.

How does the PETG-based material behave during printing?

It prints at typical PETG temperatures with minimal warp, low odour, strong layer adhesion and a naturally glossy finish that needs only a touch of gluestick for bed grip.

Will the 750 g spool fit on my printer’s holder?

The 750 g spool uses a common cardboard core size that sits on standard horizontal or vertical holders; check your holder’s maximum spool width and core diameter to be sure.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.