אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Light grey PLA filament spool, 1.75 mm diameter, 750 g, matte satin finish

E3D Online

E3D Online spoolWorks PLA Filament 1.75mm 750g Light Grey06 3d printers accessory

SKU CH-1J9Y-GPVSC

1.75 mm PLA filament on a 750 g spool, ±0.05 mm tolerance, prints at 210–220 °C with low ooze and warp

  • ColorGray
  • TypeFilament
  • Biodegradable material reduces environmental impact
  • Low ooze and warp for cleaner prints
  • Bonds easily to cold beds without adhesives
  • Strong matte finish with consistent colour
  • 75 mm diameter with ±0.05 mm tolerance

Filament for home and professional printing

This 1.75 mm PLA filament comes on a 750 g spool in Light Grey. It is designed for both home and professional 3D printing and ships vacuum sealed with desiccant. The material is biodegradable and produces a strong, solid colour with a matte or satin finish that varies with print temperature.

Low ooze and warp on long prints

The formulation keeps ooze and warp low even during extended print sessions so layers stay accurate over time. It bonds easily to cold beds prepared with blue tape, UHU stick or clean glass. A diameter tolerance of +/- 0.05 mm supports consistent extrusion throughout a full spool.

Prints at 210-220degC with minimal smell

Normal printing temperatures sit between 210 and 220 °C, which keeps nozzle heat and power draw moderate. The biodegradable PLA emits little odour and runs quietly on most desktop machines. Vacuum bagging with desiccant preserves dry filament for reliable flow.

נקודות עיקריות

  • Biodegradable material reduces environmental impact
  • Low ooze and warp for cleaner prints
  • Bonds easily to cold beds without adhesives
  • Strong matte finish with consistent colour
  • 75 mm diameter with ±0.05 mm tolerance

מפרט טכני

BrandE3D
ModelPLA
ColorGray
TypeFilament

שאלות על הפריט הזה

How much power does the spoolWorks PLA draw during a full day of printing?

The filament itself uses no power; energy consumption depends on your printer's hot-end and heated bed running at 210-220°C.

Which printer parts must I already have to use this 1.75mm spool?

You need a printer that accepts 1.75mm filament and can reach a nozzle temperature of 210-220°C with a bed surface such as blue tape, glue stick or clean glass.

Will this PLA work reliably on an older machine that only prints ABS?

Yes, provided the older printer can extrude 1.75mm material at 210-220°C and you use a compatible bed surface like blue tape or glue stick.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.