אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black 5.25 inch internal card reader with mesh front panel and six slots

EN-Labs

EN-Labs 11-001-183 5.25" internal card reader

SKU CH-FBKA-91H3Z

A 5.25" bay internal card reader supporting CF, XD, MS, M2, SD and TF MicroSD up to 64GB with USB 2.0 and a front USB 3.0 port

  • TypeAll-in-one
  • Installation TypeInternal
  • ColorBlack
  • InterfaceUSB 2.0
  • Support - Compact FlashYes
  • Support - Memory StickYes
  • Read multiple card formats from one 5.25" bay
  • Mesh-front design integrates cleanly with compatible cases
  • Front USB 3.0 port adds high-speed peripheral access
  • USB 2.0 interface delivers 480 Mbps card transfers
  • Supports cards up to 64 GB capacity

What this product is

The EN-Labs 11-001-183 is a new internal all-in-one card reader that fits a standard 5.25 inch bay. It adds six card slots and one front USB 3.0 port to a desktop or server through a single internal USB 2.0 connection. The black mesh faceplate suits chassis with a front mesh panel.

How it fits into a build

The unit mounts in a 5.25 inch drive bay using the supplied screws and draws power from the motherboard USB header. It provides one external USB 3.0 port for flash drives or peripherals while the reader itself runs at USB 2.0 480 Mbps speeds. No extra power cable is required.

What it replaces and when to upgrade

This reader replaces a missing or limited front-panel card slot on systems that still have a 5.25 inch bay. It supports CF, MS, MMC, SD, XD and TF cards up to 64 GB capacity. Builders who need faster internal transfer rates or who lack a free 5.25 inch bay should consider other form factors.

נקודות עיקריות

  • Read multiple card formats from one 5.25" bay
  • Mesh-front design integrates cleanly with compatible cases
  • Front USB 3.0 port adds high-speed peripheral access
  • USB 2.0 interface delivers 480 Mbps card transfers
  • Supports cards up to 64 GB capacity

מפרט טכני

BrandEn-Labs
Model11-001-183
TypeAll-in-one
Installation TypeInternal
ColorBlack
InterfaceUSB 2.0
Support - Compact FlashYes
Support - Memory StickYes
Support - MMCYes
Support - SDYes
Support - SmartMediaNo
Support - xDYes
Windows VistaWorks with Windows Vista
Dimensions5.25" CD-ROM Slot
FeaturesAdd memory card reading and writing support to your desktop computer or server through an internal 5.25" bay Unique design that blends well with any chassis that has a front mesh panel, Supports most standard memory cards including CF, MD, SM, XD, SD, SDHC, SDXC, MMC, MS, M2, and MicroSD(TF) Cards, USB 2.0 480Mbps Highspeed and wide compatibility make this multi-card reader an ideal solution for photo kiosks or photo labs, and desktop computers, Maximum capacity of the memory up to 32GB, Front USB 3.0 access lets you connect USB devices easily ,transfer speed up to 5Gbps, It is USB p
Package Contents5.25” USB2.0 card reader, 1x mounting screws bag

שאלות על הפריט הזה

Does the USB 2.0 interface limit sustained transfer speeds when I offload large batches of photos?

Yes, the internal USB 2.0 link caps throughput at 480 Mbps, so extended reads or writes will not exceed that rate.

Will the front-panel USB 3.0 port add noticeable heat or fan noise during all-day use?

The reader draws power from the USB bus and has no active cooling, so it adds negligible heat and no audible noise during continuous operation.

Which motherboard header must my system provide for the internal USB 2.0 connection?

A standard internal USB 2.0 header (nine-pin) is required; the included mounting screws secure the unit in a 5.25" bay.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.