אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Two black aluminum heatspreaders on dual-channel DDR4 sticks

G.SKILL

G.SKILL Ripjaws V F4-3600C18D-64GVK 64GB DDR4 3600 desktop RAM

SKU CH-1PNT-HHQHT MPN F4-3600C18D-64GVK

Dual-channel 64GB kit with two 32GB DDR4 modules at 3600MHz CL18 1.35V for Intel Z790/Z690/Z590/Z490/Z390 and AMD X570/B550 platforms

  • Capacity64GB (2 x 32GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3600 (PC4 28800)
  • CAS LatencyCL18
  • Timing18-22-22-42
  • Voltage1.35V

Capacity 64GB (2 x 32GB)

Speed DDR4 3600 (PC4 28800)

CAS Latency · Color · Fan Included CL18 · Black · No

  • 64 GB dual-channel kit (2 × 32 GB) for high-capacity multitasking
  • DDR4 3600 speed (PC4 28800) for fast data transfer
  • CL18 latency with 18-22-22-42 timings for responsive performance
  • 35 V operation keeps power draw efficient
  • Intel XMP 2.0 profile enables one-click overclock setup

Capacity and platform fit

This 64GB dual-channel kit uses two 32GB DDR4 modules rated at 3600 MT/s with CL18 timing. It targets Intel Z790, Z690, Z590, Z490 and Z390 platforms as well as AMD X570 and B550 boards. XMP 2.0 support lets the kit load its rated speed and timings from the BIOS with a single setting. Unbuffered non-ECC design suits mainstream desktop builds.

Build and clearance

Black aluminum heat spreaders cover each module to a height of 42mm, leaving room for most oversized CPU coolers. The 288-pin DIMM form factor fits standard desktop slots. Operating voltage is set at 1.35V for the rated profile. Matched modules are sold together; mixing kits is not recommended by the manufacturer.

Deciding specification

The kit runs at DDR4 3600 with a CAS latency of 18 and timings of 18-22-22-42 at 1.35V. If your motherboard and CPU combination can stabilise this frequency and latency, the kit will deliver the rated bandwidth; otherwise it will fall back to a lower JEDEC speed.

נקודות עיקריות

  • 64 GB dual-channel kit (2 × 32 GB) for high-capacity multitasking
  • DDR4 3600 speed (PC4 28800) for fast data transfer
  • CL18 latency with 18-22-22-42 timings for responsive performance
  • 35 V operation keeps power draw efficient
  • Intel XMP 2.0 profile enables one-click overclock setup

מפרט טכני

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-3600C18D-64GVK
Capacity64GB (2 x 32GB)
Type288-Pin PC RAM
SpeedDDR4 3600 (PC4 28800)
CAS LatencyCL18
Timing18-22-22-42
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderYes
FeaturesOverclock performance DDR4 memory designed for compatible Intel platforms.
Sleek and stylish aluminum heatspreader design.
Intel XMP 2.0 support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the
Recommend UseAMD X570 / B550
Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390
משקל משלוח0.14 kg
מידות האריזה183 × 132 × 13 mm

גרסאות נוספות של דגם זה

5 נוספים באותה הסדרה

אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.

שאלות על הפריט הזה

Does the DDR4 3600 (PC4 28800) rating limit real-world throughput?

The kit runs at 3600 MT/s with CL18 18-22-22-42 timings at 1.35 V via Intel XMP 2.0; actual bandwidth depends on the memory controller and motherboard topology.

Will the 42 mm module height clear large CPU coolers?

Each stick measures 42 mm tall, a dimension chosen to fit under most oversized air coolers while still carrying an aluminum heatspreader.

How do I enable the rated 3600 speed on a Z690 DDR4 board?

Install the two 32 GB modules in the primary dual-channel slots, enter the BIOS, load the XMP 2.0 profile, save, and reboot — skipping the profile load leaves the memory at JEDEC default speeds.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.