GUDGA
GUDGA GVR Series 2TB NVMe internal SSD
2TB NVMe internal SSD with PCIe 3.0 x4 interface delivering up to 3,300 MB/s sequential read for high-end workstations
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Capacity2TB
- Memory Components3D TLC
- InterfacePCI-Express 3.0 x4
- ProtocolNVMe 1.3
- Fast sequential reads up to 3300 MB/s speed boot and app launches
- High sequential writes up to 14400 MB/s accelerate large file saves
- NVMe 1.3 protocol cuts latency to 0.01 ms for snappy response
- PCIe 3.0 x4 interface delivers 24000 MB/s bandwidth for heavy workloads
- Compact M.2 2280 form factor fits laptops and desktops without extra cables
GVR Series 2TB NVMe drive
The GUDGA GVR Series provides 2TB of internal solid-state storage using 3D TLC memory and a PCIe 3.0 x4 interface with NVMe 1.3 protocol. It delivers sequential reads up to 24000 MBps and writes up to 14400 MBps in the standard M.2 2280 form factor.
Suits high-capacity NVMe workloads
This drive suits users who need 2TB of fast NVMe storage for large projects, applications or game libraries. It is less suited for systems limited to PCIe 2.0 or older motherboards without an M.2 slot supporting NVMe.
Fits M.2 2280 slots with PCIe 3.0 x4
Installation requires an M.2 2280 slot wired for PCIe 3.0 x4 and a motherboard with NVMe boot support. The 2.20mm height and 26g weight keep clearance tight for low-profile builds. The package includes a mounting screw so no extra hardware is needed.
נקודות עיקריות
- Fast sequential reads up to 3300 MB/s speed boot and app launches
- High sequential writes up to 14400 MB/s accelerate large file saves
- NVMe 1.3 protocol cuts latency to 0.01 ms for snappy response
- PCIe 3.0 x4 interface delivers 24000 MB/s bandwidth for heavy workloads
- Compact M.2 2280 form factor fits laptops and desktops without extra cables
מפרט טכני
| Brand | GUDGA |
|---|---|
| Series | GVR |
| Model | GVR-xxx-2280 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Capacity | 2TB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 3.0 x4 |
| Protocol | NVMe 1.3 |
| Max Sequential Read | Up to 24000 MBps |
| Max Sequential Write | Up to 14400 MBps |
| Seek Time | 0.01ms |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +85°C |
| Height | 2.20mm |
| Width | 22mm |
| Depth | 80mm |
| Weight | 26g |
| Package Content | 1 x SSD; 1 x Screw |
| Manufacturer Recertified | Yes |
גרסאות נוספות של דגם זה
3 נוספים באותה הסדרה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
GUDGA GVR 512GB PCIe 3.0 x4 NVMe internal SSD
- Internal Solid Stat…
- Consumer
GUDGA GVR 1TB PCIe 3.0 x4 NVMe internal SSD
- Internal Solid Stat…
- Consumer
שאלות על הפריט הזה
Will my motherboard need a PCIe 3.0 x4 M.2 slot to run this GVR 2 TB drive?
Yes — the drive uses a PCIe 3.0 x4 interface and the M.2 2280 form factor, so the board must provide that slot and an NVMe 1.3-compatible BIOS.
Can I keep my older PCIe 3.0 x4 M.2 SSD installed alongside this GVR drive?
If the motherboard has a second M.2 2280 slot wired for PCIe 3.0 x4, both drives will operate at their rated speeds; the GVR adds 2 TB of NVMe 1.3 storage without slowing the existing drive.
How do I confirm the GVR is delivering its 24 000 MB/s read and 14 400 MB/s write after installation?
Run a benchmark such as CrystalDiskMark on the NVMe namespace; sequential results should approach the rated 24 000 MB/s read and 14 400 MB/s write, and the drive temperature should stay within 0 – 70 °C under load.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
HP 507283-001 146GB 10000 RPM SAS 2.5" internal hard drive
- Bare Drive
- SATA
HP 628059-B21 3TB 7200 RPM SATA 3.0Gb/s 3.5" internal hard drive
- Bare Drive
- SATA 3.0Gb/s
Seagate Cheetah 10K.7 ST3300007LC 300GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive
- Bare Drive
- SCSI Ultra320 80pin
IBM 49Y2003 600GB 2.5" SAS 10000 RPM 16MB internal hard drive
- SAS 6Gb/s
- 10000 RPM






