אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
New Gulfe ATX power supply, compact silver unit with single fan and multiple cables

Gulfe

Gulfe ATX Power Supply for HP Pavilion Elite HPE H8-1040

SKU CH-89KV-FXDTD

ATX power supply with reduced depth, 24-pin and 4-pin connectors, three SATA outputs, and over-current protection

  • TypeATX
  • Fans1
  • Weight2.5
  • ATX reduced depth fits compact HP Pavilion Elite cases
  • 115/230 V input supports worldwide mains voltages
  • Over-current and over-power protection guards components
  • 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors cover legacy builds
  • 17 ms hold-up time maintains power through brief dips

Direct Replacement for HP Pavilion Elite HPE H8-1040

This ATX power supply is built as a direct replacement for the HP Pavilion Elite HPE H8-1040 desktop. It matches the original form factor and connector layout so the system powers on without adapter cables or modifications. The unit is new and includes over-current and over-power protection circuits.

Reduced Depth ATX Form Factor Fits Tight Chassis

A reduced depth of 5.86 inches by 3.3 inches lets this unit slide into compact brand-name cases where a full-depth ATX supply would foul drive cages or motherboard headers. The single fan exhausts heat through the rear grille. Standard 115 or 230 volt AC input works worldwide without a voltage switch.

24-Pin ATX Plus Legacy Connectors Cover Older Builds

The harness provides a 24-pin (20+4) motherboard connector, a 4-pin CPU power plug, three SATA power leads, two LP4 peripheral plugs and one floppy connector. This mix supports a modern motherboard plus multiple hard drives and legacy optical or floppy drives. Hold-up time is rated at 17 ms minimum at nominal input.

נקודות עיקריות

  • ATX reduced depth fits compact HP Pavilion Elite cases
  • 115/230 V input supports worldwide mains voltages
  • Over-current and over-power protection guards components
  • 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors cover legacy builds
  • 17 ms hold-up time maintains power through brief dips

מפרט טכני

BrandGulfe
TypeATX
Fans1
Weight2.5

שאלות על הפריט הזה

Does the 2.5 kg weight affect heat dissipation during continuous operation?

The single fan and 2.5 kg mass provide standard cooling for the 17 ms hold-up time rating.

What noise level should I expect from the fan after hours of use?

One fan runs at the speed needed for the +12V1 and +12V2 rails under load.

Which existing cables must my HP Pavilion Elite HPE H8-1040 already have for this unit to connect?

Your motherboard needs a 24-pin ATX socket, a 4-pin P4-12V header, plus SATA and LP4 ports for drives.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.