אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black 120mm square case fan with four-pin connector and centre label

HP

HP XW8200 System Fan 4715KL-04W-B46 120mm 4-Pin 12V 0.9A

SKU CH-XAY5-66275

120 mm case fan with 4-pin PWM control runs at 12 V and 0.9 A for HP xw8200 workstations

  • TypeCase Fan
  • Direct HP workstation compatibility with the XW8200 chassis
  • 120 mm frame fits standard mounting points in the case
  • Four-pin connector enables PWM speed control by the motherboard
  • 12 V 0.9 A rating delivers strong airflow for system cooling
  • Genuine HP part numbers 356106-002 and 356106-003 ensure correct replacement

HP XW8200 System Fan 4715KL-04W-B46

This 120mm case fan is built for the HP XW8200 workstation and carries part numbers 356106-002 and 356106-003. It runs on 12V DC at 0.9A and uses a 4-pin 4-wire connector for PWM control. The unit is supplied new and matches the original manufacturer specification.

Installation notes

The 4-pin connector aligns with the standard motherboard header on the XW8200 chassis, so no adapter is required. Mounting holes follow the 120mm pattern already present in the system. The only common issue is cable routing in the tight workstation enclosure; ensure the wire does not contact moving parts.

Suitability

This fan suits owners of an HP XW8200 needing a direct replacement for a failed or noisy original unit. It is not intended for builders who need a different voltage, connector type or frame size, nor for anyone looking to upgrade airflow beyond the stock specification.

נקודות עיקריות

  • Direct HP workstation compatibility with the XW8200 chassis
  • 120 mm frame fits standard mounting points in the case
  • Four-pin connector enables PWM speed control by the motherboard
  • 12 V 0.9 A rating delivers strong airflow for system cooling
  • Genuine HP part numbers 356106-002 and 356106-003 ensure correct replacement

מפרט טכני

TypeCase Fan

שאלות על הפריט הזה

How do I confirm the 4-pin 4-wire 120mm fan is spinning at the correct 12V 0.9A after installation?

Connect the 4-pin connector to the motherboard header, power on the HP XW8200, then check the BIOS hardware monitor or a fan-control utility to verify the RPM reading matches the expected speed for the 4715KL-04W-B46 model.

What comes in the box with the HP XW8200 system fan and what must I source separately?

The package includes the 120mm 4-pin 4-wire fan unit with part numbers 356106-002 and 356106-003; mounting screws and any required fan filters or adapters are not included and must be purchased separately.

Which version of the 4715KL-04W-B46 should I choose for my HP XW8200 workstation?

Both listed part numbers 356106-002 and 356106-003 refer to the same 12V 0.9A 120mm 4-pin 4-wire specification, so either will work as a direct replacement for the XW8200 system fan.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.