אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
3.5 inch silver metal hard drive with SAS connector and hot-swap tray

IBM

IBM 44W2245 600GB 15000 RPM SAS 6Gb/s 3.5" internal hard drive

SKU CH-SW59-PQT9X MPN 44W2245

A 600 GB 3.5 inch SAS hard drive spinning at 15000 RPM with a 768 MBps transfer rate for server workloads

  • PackagingRetail
  • InterfaceSAS 6Gb/s
  • Capacity600GB
  • RPM15000 RPM
  • Average Latency6Gb/s
  • FeaturesCompatibility: IBM BladeCenter blade server IBM System x Max
  • 15000 RPM spindle speed delivers rapid data access
  • 600 GB capacity stores large server workloads
  • SAS 6 Gb/s interface enables 768 MB/s peak throughput
  • 5 inch hot-swap form factor fits IBM BladeCenter and System x bays
  • New retail drive ready for immediate deployment

Server-grade SAS hard drive

The IBM 44W2245 is a 600 GB 3.5 inch internal hard drive spinning at 15000 RPM with a SAS 6Gb/s interface. It is supplied in retail packaging and carries a maximum external transfer rate of 768 MBps. The drive uses a hot-swap tray for quick replacement in supported chassis.

Suited for enterprise server arrays

This unit fits IBM BladeCenter blade servers and IBM System x platforms that accept 3.5 inch SAS hot-swap drives. It targets workloads demanding high spindle speed and dual-port SAS connectivity. Buyers needing larger capacities or different form factors should look at other storage classes.

15000 RPM spindle speed

The 15000 RPM rotation rate is the single specification that determines whether this drive meets the performance envelope of the target server environment. It delivers the low latency and high IOPS required by transaction-heavy applications. Systems that cannot accommodate 15K SAS drives must select an alternative.

נקודות עיקריות

  • 15000 RPM spindle speed delivers rapid data access
  • 600 GB capacity stores large server workloads
  • SAS 6 Gb/s interface enables 768 MB/s peak throughput
  • 5 inch hot-swap form factor fits IBM BladeCenter and System x bays
  • New retail drive ready for immediate deployment

מפרט טכני

BrandIBM
Model44W2245
PackagingRetail
InterfaceSAS 6Gb/s
Capacity600GB
RPM15000 RPM
Average Latency6Gb/s
FeaturesCompatibility:
IBM BladeCenter blade server
IBM System x
Maximum External Data Transfer Rate:768 MBps(6Gbps)
UsageIdeal for Servers
Form Factor3.5"
משקל משלוח1.36 kg
מידות האריזה305 × 254 × 152 mm

שאלות על הפריט הזה

What sustained throughput can the 6Gb/s SAS link deliver on this 15000 RPM drive?

The interface supports a maximum external data transfer rate of 768 MBps, matching the 6Gb/s SAS specification.

How much heat and noise should I expect when the 3.5" 15000 RPM spindle runs continuously in a server chassis?

A 15000 RPM enterprise drive generates significant heat and audible whine; plan for active airflow and acoustic damping in the enclosure.

Which server backplane or controller must I already have to install this hot-swap 3.5" SAS tray?

The drive fits IBM BladeCenter and System x hot-swap bays and requires a 6Gb/s SAS backplane or RAID controller with an available port.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.