Kingston Technology Corp.
Kingston Technology Corp. KSM48R40BD4TMM-64HMR 64GB DDR5 4800 ECC Registered DIMM server RAM
A 64 GB DDR5 registered ECC DIMM running at 4800 MT/s with CL40 timings at 1.10 V
- Capacity64GB
- Type288-PIN DDR5 R-DIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Timing40-39-39
- Voltage1.10V
- 64 GB capacity supports large server workloads
- DDR5-4800 speed delivers 38400 MB/s bandwidth
- ECC registered design corrects errors and stabilises signals
- CL40 40-39-39 timings tuned for 4800 MHz operation
- 10 V voltage reduces power draw per module
Capacity and registration
This 64 GB DDR5 registered DIMM is built for servers and workstations that require error-correcting memory at native 4800 MT/s. The module uses a 288-pin form factor and operates at 1.10 V with CL40-39-39 timings.
Registered ECC requirement
Systems that accept registered DDR5 ECC modules can use this part; platforms limited to unbuffered memory or to a different DDR generation cannot. Buyers needing non-ECC or lower-capacity sticks should select a different product.
4800 MT/s speed rating
The single specification that decides fit is the DDR5-4800 (PC5-38400) speed grade. The motherboard and processor must support this exact data rate for the module to run at its rated frequency.
נקודות עיקריות
- 64 GB capacity supports large server workloads
- DDR5-4800 speed delivers 38400 MB/s bandwidth
- ECC registered design corrects errors and stabilises signals
- CL40 40-39-39 timings tuned for 4800 MHz operation
- 10 V voltage reduces power draw per module
מפרט טכני
| Brand | Kingston |
|---|---|
| Model | KSM48R40BD4TMM-64HMR |
| Capacity | 64GB |
| Type | 288-PIN DDR5 R-DIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Timing | 40-39-39 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| משקל משלוח | 0.32 kg |
| מידות האריזה | 142 × 43 × 8 mm |
שאלות על הפריט הזה
Will this 288-pin DDR5 R-DIMM fit my motherboard's DDR5 slots?
This module uses the standard 288-pin DDR5 R-DIMM form factor. It fits motherboards with DDR5 registered DIMM slots that support ECC memory.
Can I mix this CL40 4800 MHz module with slower DDR5 ECC RDIMMs I already have?
The system will run all installed modules at the speed and timings of the slowest kit. This module operates at 4800 MHz with 40-39-39 timings at 1.10 V.
How do I confirm the 64 GB module is running at DDR5 4800 with ECC active?
Check the BIOS memory information or use a tool like CPU-Z. It should report 4800 MT/s, CL40 timings, 1.10 V, and show ECC as enabled for this 64 GB DIMM.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.



