אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black full-tower chassis with tempered-glass side and front panels, steel frame, aluminium accents

Lian Li

Lian Li O11 Dynamic EVO XL Full Tower PC Case Black

SKU CH-DYFG-S74K1

Full tower case supports E-ATX boards, 460 mm GPUs and 420 mm radiators on three sides

  • Supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards
  • Fits graphics cards up to 460mm long for high-end builds
  • CPU cooler clearance of 167mm accommodates large air coolers
  • Three 120mm or 140mm fan mounts on top, side and bottom
  • Tempered glass panels and steel frame create a premium look

Full tower chassis for E-ATX builds

The Lian Li O11 Dynamic EVO XL is a full tower case built from steel, aluminium and 4.0mm tempered glass. It measures 522mm deep, 304mm wide and 531.9mm high. The layout supports E-ATX boards up to 280mm, plus ATX, Micro-ATX and Mini-ITX, with eight expansion slots for multi-GPU or add-in cards.

Suits high-airflow water-cooling loops.

Builders planning triple-radiator custom loops at top, side and bottom will use the 360, 420, 240 and 280mm mounting points on all three faces. Fan positions take 120mm or 140mm units in the same locations. The 460mm GPU clearance and 167mm CPU cooler limit fit most flagship parts, but the external dimensions demand a large desk or floor footprint.

Eight expansion slots define multi-card capacity

Eight rear slots are the fixed limit for add-in cards. If the build requires more than eight full-height brackets, this chassis cannot accommodate it. The ATX power supply bay accepts units under 220mm deep. Storage bays hold four 3.5-inch drives and three 2.5-inch drives behind the motherboard tray.

נקודות עיקריות

  • Supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards
  • Fits graphics cards up to 460mm long for high-end builds
  • CPU cooler clearance of 167mm accommodates large air coolers
  • Three 120mm or 140mm fan mounts on top, side and bottom
  • Tempered glass panels and steel frame create a premium look

מפרט טכני

טרם פורסם מפרט טכני לפריט זה.

שאלות על הפריט הזה

How loud does the system run when all fan mounts are populated and the rig runs all day?

The chassis itself adds no noise; acoustic output depends entirely on the fans you install in the ten 120 mm or 140 mm positions and on your GPU and PSU coolers.

Which parts must I already own before this case can function as a complete PC?

You need an E-ATX, ATX, Micro-ATX or Mini-ITX motherboard, an ATX power supply under 220 mm, a CPU cooler no taller than 167 mm, a graphics card up to 460 mm long, and your choice of storage drives and cooling fans.

Will my current 360 mm radiator and 3.5 inch hard drives fit together in this build?

Yes — the case accepts a 360 mm radiator in the top, side or bottom positions while the drive cage holds four 3.5 inch drives behind the motherboard tray.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.