אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Blue anodized aluminum Raspberry Pi 3 case with heat sinks and rubber feet

Micro Connectors

Micro Connectors RAS-PCS03-BL Aluminum Raspberry Pi 3 Case Blue

SKU CH-HVEJ-C0YP9 MPN RAS-PCS03-BL

Aluminum case with heat sinks cools Raspberry Pi 1 B+, Pi 2 B and Pi 3 B/B+ and includes wall-mount option

  • FeaturesCompatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3
  • Package ContentsRaspberry Pi case, heat sinks, feat pads, screws, screwdrive
  • Aluminium construction draws heat away from the board
  • Included heat sinks and thermal pads boost cooling further
  • Precision-cut openings keep every port fully accessible
  • Wall-mount option lets you secure the Pi vertically
  • Anti-slip rubber feet hold the case steady on any surface

Aluminium Case for Raspberry Pi 3

The Micro Connectors RAS-PCS03-BL is an aluminium enclosure designed for Raspberry Pi 1 Model B+, Pi 2 Model B and Pi 3 Model B/B+ boards. It uses the metal body to draw heat away from the processor and includes heat-sink pads for extra cooling. Precision-cut openings give access to every port without removing the lid. Anti-slip rubber feet and wall-mount slots let the board sit on a desk or attach to a surface.

Makers using Pi 1 B+ through Pi 3 B+

This case suits hobbyists and prototype builders who want passive cooling and a tidy finish for the supported boards. It does not fit Raspberry Pi 4, Pi 5 or Compute Module form factors, so buyers with those models need a different enclosure. The kit is also not intended for users who require active fan mounting or liquid-cooling provisions.

Tool-free assembly with included driver

The package supplies the case halves, heat-sink pads, feet pads, screws and a small screwdriver so assembly starts immediately. Fit the pads onto the chips, lower the board into the lower half, fasten the supplied screws and press on the rubber feet. The only common issue is forgetting to peel the protective film from the thermal pads before installation, which reduces heat transfer.

נקודות עיקריות

  • Aluminium construction draws heat away from the board
  • Included heat sinks and thermal pads boost cooling further
  • Precision-cut openings keep every port fully accessible
  • Wall-mount option lets you secure the Pi vertically
  • Anti-slip rubber feet hold the case steady on any surface

מפרט טכני

BrandMicro Connectors
ModelRAS-PCS03-BL
FeaturesCompatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B/B+
Quality and durable aluminum casing to dissipate heat
Precision-cut casing allows easy access to all ports
Heat sink kits included for cooling
Wall mount compatible
Anti-slip rubber feet pads
Dimension: 1.08" x 2.43" x 3.52"
Weight: 0.12 lb.
Package ContentsRaspberry Pi case, heat sinks, feat pads, screws, screwdriver
משקל משלוח0.10 kg
מידות האריזה194 × 94 × 43 mm

שאלות על הפריט הזה

Which Raspberry Pi boards fit this case?

It fits Raspberry Pi 1 Model B+, Pi 2 Model B, and Pi 3 Model B/B+ boards.

Can I keep using the GPIO header and ports with the case closed?

The precision-cut aluminum allows access to all ports and the GPIO header while the board is mounted.

How do I know the heat sinks are making contact after assembly?

The kit includes thermal pads; after tightening the screws the pads compress and the aluminum body feels warm under load.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.