אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Green circuit board with gold edge connector and black controller chips, 7.00mm thick

Micron Technology, Inc.

Micron Technology, Inc. MTFDKCB1T9TDZ-1AZ1ZA 1.92TB enterprise SSD

SKU CH-FMKN-M2KAN MPN MTFDKCB1T9TDZ-1AZ1ZA

1.92TB enterprise SSD using 3D TLC over PCIe 4.0 with 6500 MBps read and 2200 MBps write

  • Capacity1.92TB
  • Memory Components3D TLC
  • InterfacePCI-Express 4.0, NVMe v1.4
  • Max Sequential ReadUp to 6500 MBps
  • Max Sequential WriteUp to 2200 MBps
  • 4KB Random ReadUp to 430,000 IOPS
  • Up to 6500 MBps sequential read for fast data access
  • Up to 2200 MBps sequential write for quick transfers
  • Up to 430000 IOPS random read for responsive workloads
  • Up to 95000 IOPS random write for sustained performance
  • 92TB 3D TLC capacity for high-density enterprise storage

Micron 7400 PRO enterprise SSD

The Micron 7400 PRO is a 1.92TB enterprise solid state drive built with 3D TLC memory. It targets servers and storage arrays that require consistent throughput and low latency for mixed workloads. The drive uses a PCI-Express 4.0 interface with NVMe v1.4 protocol. It is sold new and measures 7.00mm in height.

1.92TB capacity and performance headroom

Sequential reads reach up to 6500 MBps while sequential writes reach up to 2200 MBps. Random 4KB reads hit up to 430,000 IOPS and random writes up to 95,000 IOPS. Read latency is 75 µs and write latency is 15 µs. These figures suit read-intensive databases, virtualisation and content delivery, but write-heavy logging or sustained large-block ingest will saturate the write ceiling sooner.

PCI-Express 4.0 NVMe interface limits

The PCI-Express 4.0 x4 link caps maximum bandwidth near the quoted sequential speeds, so heavier queues or larger block sizes cannot exceed that ceiling. NVMe v1.4 adds namespace management and endurance telemetry but does not raise the physical throughput. The drive operates from 0°C to 70°C; thermal throttling may engage before the upper limit in poorly ventilated chassis.

נקודות עיקריות

  • Up to 6500 MBps sequential read for fast data access
  • Up to 2200 MBps sequential write for quick transfers
  • Up to 430000 IOPS random read for responsive workloads
  • Up to 95000 IOPS random write for sustained performance
  • 92TB 3D TLC capacity for high-density enterprise storage

מפרט טכני

BrandMicron
Series7400 PRO
ModelMTFDKCB1T9TDZ-1AZ1ZA
Capacity1.92TB
Memory Components3D TLC
InterfacePCI-Express 4.0, NVMe v1.4
Max Sequential ReadUp to 6500 MBps
Max Sequential WriteUp to 2200 MBps
4KB Random ReadUp to 430,000 IOPS
4KB Random WriteUp to 95,000 IOPS
Read Latency75 µs
Write Latency15 µs
Operating Temperature0°C ~ +70°C
Height7.00mm
משקל משלוח0.09 kg
מידות האריזה130 × 97 × 13 mm

שאלות על הפריט הזה

Will the Micron 7400 PRO 1.92TB PCI-Express 4.0 NVMe v1.4 drive operate in a server slot limited to PCIe 3.0?

The drive is backward compatible and will function in a PCIe 3.0 slot at the lower interface speed; full 6500 MBps sequential read and 2200 MBps write require a PCIe 4.0 connection.

Which readings show the Micron 7400 PRO 1.92TB NVMe SSD is healthy after installation?

Check SMART attributes for media wear, temperature between 0°C and 70°C, and run a 4KB random I/O test; sustained results near 430,000 read and 95,000 write IOPS with 75 µs read and 15 µs write latency indicate correct operation.

Does the Micron 7400 PRO 1.92TB MTFDKCB1T9TDZ-1AZ1ZA package include a heatsink or mounting hardware?

The drive ships as a bare 7.00 mm module; any heatsink, adapter bracket or retention screw must be sourced separately.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.