אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Pink aluminium switch-mode power supply, open-frame rectangular unit with screw terminals and voltage adjustment trimmer

myVolts

myVolts S-360-12 12V 30A 360W pink power supply

SKU CH-0EAB-5ADYQ

A 12V 30A 360W switching power supply with short-circuit, overload and overvoltage protection for industrial automation, LED displays, CCTV and 3D printers

  • TypeAT
  • High efficiency and low DC ripple for stable operation
  • Operates down to 0 °C with long service life
  • High insulation strength ensures safe, reliable use
  • Passed 100 % full-load burn-in test before shipping
  • circuit, overload and overvoltage protection built in

Industrial 12V power supply

This myVolts S-360-12 unit delivers 12V at 30A for a total of 360W. It accepts AC input from 110V to 220V with a ±15% tolerance. The aluminium alloy enclosure relies on natural convection cooling. It is built for industrial automation, LED displays, CCTV, 3D printers and similar DC loads.

Sustained load behaviour

After a 100% total load burning test the supply maintains its rated output without thermal shutdown. Low DC ripple and high working efficiency keep output stable during continuous operation. Overload, overvoltage and short-circuit protection engage automatically if limits are exceeded. The unit is rated for ambient temperatures from 0 to 40°C.

AT interface practical limits

The AT form factor provides screw terminals for L, N, GND, V and an adjustable +V/ADJ output. Wiring must handle 30A on the DC side with appropriate gauge and secure termination. No remote sense or parallel operation is specified. CCC, FCC and CE markings confirm basic safety compliance for fixed installations.

נקודות עיקריות

  • High efficiency and low DC ripple for stable operation
  • Operates down to 0 °C with long service life
  • High insulation strength ensures safe, reliable use
  • Passed 100 % full-load burn-in test before shipping
  • circuit, overload and overvoltage protection built in

מפרט טכני

TypeAT

שאלות על הפריט הזה

How loud is the S-360-12 when it runs continuously at 360 W?

The S-360-12 uses natural convection cooling with no fan, so it produces no audible noise even at full 360 W load.

What cables or connectors must I already have to wire the S-360-12 into my 3D printer?

You need to supply your own AC mains leads for the L, N and ground terminals and DC output wires for the V+ and GND terminals; the unit provides only screw terminals.

Can the S-360-12 replace the 36 W S-36-12 supply in my existing LED display rack?

Yes, both accept 100–240 V AC input and deliver 12 V DC, but the S-360-12 provides 30 A versus 3 A, so ensure your wiring and load can handle the higher current.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.