NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR4 2933 CL21 1.2V UDIMM memory upgrade
128 GB kit of four 32 GB DDR4 2933 CL21 unbuffered UDIMMs for compatible Supermicro systems
- Capacity128GB (4 x 32GB)
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 128 GB total capacity from four 32 GB modules
- DDR4 2933 MHz speed for responsive workloads
- CL21 latency at 1.2 V for efficient operation
- 288-pin UDIMM form factor fits compatible Supermicro boards
- 2Rx8 dual-rank organisation using major OEM DRAM chips
Capacity & Target System
This 128 GB kit uses four 32 GB DDR4 2933 UDIMM modules built for Supermicro workstations such as the 5039AD-I and MBD-C9X299-PGF. It suits IT professionals who need maximum non-ECC capacity on supported platforms. Unbuffered operation keeps latency low for memory-intensive workloads.
Sustained Load Behaviour
Modules run at 1.20 V with CL21 timings and 2Rx8 organisation, delivering steady throughput during long render or virtualisation sessions. Rigorous stress testing under load is performed before shipment to confirm stability. The major OEM Samsung, Micron or Hynix chips maintain consistent performance without thermal throttling.
Build & Daily Handling
Bare green PCBs without heat spreaders fit tight DIMM slots and simplify cleaning in dense server chassis. Each 288-pin UDIMM seats with standard keying for quick tool-free upgrades. Lifetime replacement coverage backs the hardware for the system's service life.
נקודות עיקריות
- 128 GB total capacity from four 32 GB modules
- DDR4 2933 MHz speed for responsive workloads
- CL21 latency at 1.2 V for efficient operation
- 288-pin UDIMM form factor fits compatible Supermicro boards
- 2Rx8 dual-rank organisation using major OEM DRAM chips
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT |
שאלות על הפריט הזה
Does the 1.2V DDR4 2933 kit add noticeable heat or fan noise when all four slots run all day?
These modules operate at the standard 1.20V DDR4 voltage and have no heat spreader, so thermal output is typical for unbuffered UDIMMs at this speed and density.
What must my motherboard provide for the 128GB (4x32GB) kit to function?
The board needs four 288-pin DDR4 UDIMM slots, support for 2Rx8 non-ECC unbuffered modules at 2933 MT/s, and a memory controller able to address 128GB total capacity.
Will the CL21 2Rx8 modules work alongside older DDR4 sticks I keep in the same system?
Mixing ranks, speeds or latencies can prevent the system from posting or force all memory to the lowest common settings; for stability, populate all four slots with this matched kit.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.



