BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 $
0.00278842BTC
במלאי
NEMIX RAM
NEMIX RAM 128GB (4x32GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM SuperMicro C9Z790-CG memory upgrade
A 128 GB kit of four 32 GB DDR5 5600 CL46 unbuffered UDIMMs validated for the SuperMicro C9Z790-CG motherboard
- Capacity128GB (4 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB total capacity across four 32 GB modules
- DDR5 5600 speed rated at PC5-44800 for high throughput
- CL46 CAS latency tuned for responsive operation
- Low 1.10 V voltage reduces power draw
- Validated for SuperMicro C9Z790-CG motherboard compatibility
128GB DDR5 kit for SuperMicro C9Z790-CG
This 128GB kit contains four 32GB DDR5 5600 UDIMM modules tested for the SuperMicro C9Z790-CG motherboard. The non-ECC unbuffered design operates at 1.1V with CL46 timing. It targets workstation and desktop users who need maximum supported capacity on this platform.
Suited for memory-intensive workloads on this
Builders who need ECC error correction, registered modules, lower latency than CL46, or speeds above 5600MT/s should look elsewhere. The kit is not intended for laptops, servers requiring registered DIMMs, or motherboards outside the validated compatibility list.
Four ranks per module deliver 128GB total capacity
Each 2Rx8 module provides two ranks, giving the memory controller ample parallelism for multitasking and large datasets. The CL46 latency and 5600MT/s rate set the performance ceiling; applications needing tighter timings or higher bandwidth will reach the limits of this specification.
נקודות עיקריות
- 128 GB total capacity across four 32 GB modules
- DDR5 5600 speed rated at PC5-44800 for high throughput
- CL46 CAS latency tuned for responsive operation
- Low 1.10 V voltage reduces power draw
- Validated for SuperMicro C9Z790-CG motherboard compatibility
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 5600MHZ Non-ECC Unbuffered RAM |
| Part Number | MD44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 128GB (4X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT |
שאלות על הפריט הזה
Does the SuperMicro C9Z790-CG motherboard need all four DDR5 slots populated for this 128 GB kit to run?
The kit provides four 32 GB modules, matching the board's four UDIMM slots so you can fill every channel at once.
Can I keep my existing DDR5 4800 modules installed with these CL46 5600 sticks?
Mixing speeds forces all modules to run at the lowest common rate, so the 5600 MT/s modules would drop to 4800 MT/s.
How do I confirm the system is running at DDR5 5600 CL46 after installation?
Check the memory speed and latency in BIOS or a tool like CPU-Z; they should show 5600 MT/s and CL46 timings.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
