NEMIX RAM
NEMIX RAM 128GB 8x16GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H13SSL-N memory upgrade
128 GB DDR5 ECC registered server memory kit of eight 16 GB modules running at 6400 MT/s CL52 1.1 V for Supermicro H13SSL-N
- Capacity128GB (8 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 128GB total capacity from eight 16GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated throughput out of the box
- Registered ECC architecture offloads the controller and corrects single-bit errors automatically
- 1V operating voltage matches the motherboard's memory-controller specification exactly
- 288-pin RDIMM form factor fits the Supermicro H13SSL-N memory slots precisely
Supermicro H13SSL-N DDR5 upgrade
This 128 GB kit is an exact-match memory upgrade for the Supermicro H13SSL-N motherboard. It delivers eight 16 GB DDR5 6400 modules that the board recognises at full capacity and rated speed.
288-pin RDIMM installation
Each module is a 288-pin registered DIMM, the form factor the H13SSL-N requires. The kit is spec-matched to the board's population rules; follow the manual's slot order and torque guidance so every module seats fully on the first attempt.
128 GB registered ECC capacity
Eight single-rank 1Rx8 modules at 1.1 V provide 128 GB of registered ECC memory, letting the controller run all slots populated at DDR5 6400 CL52. Workloads needing more than 128 GB or unbuffered UDIMM modules are not supported by this kit.
נקודות עיקריות
- 128GB total capacity from eight 16GB modules for maximum server density
- DDR5 6400 speed with CL52 latency delivers rated throughput out of the box
- Registered ECC architecture offloads the controller and corrects single-bit errors automatically
- 1V operating voltage matches the motherboard's memory-controller specification exactly
- 288-pin RDIMM form factor fits the Supermicro H13SSL-N memory slots precisely
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K8 |
| Capacity | 128GB (8 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 8X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
שאלות על הפריט הזה
How do I confirm the kit is running at DDR5 6400 with CL52 after installing it in my Supermicro H13SSL-N?
Enter the BIOS or use a tool like dmidecode to verify each of the eight slots shows 16 GB at 6400 MT/s, 1.1 V and CL52; the registered ECC design ensures the controller recognises the full 128 GB at rated speed when populated per the motherboard manual.
What exactly ships in the box and is anything else required to complete the upgrade?
The box contains the 128 GB kit — eight 16 GB DDR5 6400 CL52 1.1 V 288-pin ECC registered RDIMM modules (part MR51200-618K8). No extra cables, brackets or software are needed; just follow the board's DIMM population order.
Why choose this 128 GB 8×16 GB DDR5-6400 CL52 kit instead of a different capacity or speed for the H13SSL-N?
This kit matches the board's validated specification — DDR5 6400 (PC5-51200), 1Rx8 registered ECC, 1.1 V, CL52 — so all eight slots run at full capacity and rated timing without down-clocking or population limits.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
Supermicro 2 kW Redundant Server Power Supply 80 Plus Titanium 12 V 166.70 A
- 120 V AC 230 V AC
- 96%



