BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 $
0.002756BTC
במלאי
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR5 4800 CL40 SODIMM SuperMicro X13SRN-H memory upgrade
16 GB dual-channel DDR5 4800 CL40 SODIMM kit validated for SuperMicro X13SRN-H
- Capacity16GB (2 x 8GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 16 GB dual-channel kit boosts multitasking headroom
- DDR5 4800 CL40 speed feeds data to CPU faster
- 10 V operation keeps power draw low
- 262-pin SODIMM fits SuperMicro X13SRN-H slots
- Samsung, Micron or Hynix chips ensure reliability
SuperMicro X13SRN-H DDR5 SODIMM kit
This 16 GB kit contains two 8 GB DDR5 4800 SODIMM modules built for the SuperMicro X13SRN-H motherboard. Each stick runs at 1.10 V with CL40 latency and a 1Rx8 organisation. The unbuffered non-ECC design targets workstation and server boards that accept standard SODIMM memory. Installation follows the board manual and takes only minutes.
Verify board slots and memory rules
Confirm the X13SRN-H has two free 262-pin SODIMM slots before ordering. Check the motherboard manual for maximum capacity per slot and any population order requirements. The kit operates at DDR5 4800 speeds; the system will train to the highest common rate supported by the CPU and BIOS. No heat spreaders are fitted, so ensure airflow in the chassis is adequate.
Replaces slower or smaller DDR5 SODIMMs
This kit upgrades systems running lower-capacity or lower-speed DDR5 SODIMMs in the X13SRN-H platform. The jump is worthwhile when workloads need more than the current memory ceiling or when moving from a single module to a matched pair for dual-channel operation. Buyers needing ECC, registered modules or capacities beyond 16 GB should look elsewhere.
נקודות עיקריות
- 16 GB dual-channel kit boosts multitasking headroom
- DDR5 4800 CL40 speed feeds data to CPU faster
- 10 V operation keeps power draw low
- 262-pin SODIMM fits SuperMicro X13SRN-H slots
- Samsung, Micron or Hynix chips ensure reliability
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS38400-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR5 4800MHZ PC5-38400 1Rx6 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT |
שאלות על הפריט הזה
Does the kit include both 8 GB modules or do I need to buy a second stick separately?
The kit contains two 8 GB modules giving 16 GB total, so no extra sticks are required.
Should I choose the CL40 4800 MHz kit or a different speed grade for the X13SRN-H?
This CL40 4800 MHz kit matches the board's native DDR5 speed, making it the correct choice for the X13SRN-H.
What does the 4800 MHz rating actually deliver once the modules are installed in the server?
The memory runs at 4800 MT/s with CL40 latency at 1.1 V, providing the standard DDR5 bandwidth the platform expects.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
