SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 $
0.00501343BTC
במלאי
NEMIX RAM
NEMIX RAM 16GB DDR4 2400 ECC RDIMM CL17 SuperMicro Compatible Memory Upgrade
A 16 GB DDR4 2400 ECC registered DIMM built for SuperMicro servers with CL17 latency and 1.2 V operation
- Capacity16GB
- SpeedDDR4 2400 (PC4 19200)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 capacity for larger server workloads
- 2400 MHz DDR4 speed with PC4-19200 bandwidth
- ECC registered RDIMM for data integrity
- CL17 latency at 1.20 V operation
- 288-pin 2Rx4 module built for SuperMicro compatibility
16 GB DDR4 ECC RDIMM for Supermicro
This 16 GB DDR4 2400 ECC registered DIMM is built for Supermicro servers and workstations. It runs at 1.20 V with CL17 latency and uses a 2Rx4 organisation across 288 pins. The module is validated for mission-critical environments where data integrity matters.
Suits admins expanding compatible Supermicro
IT teams adding capacity to qualified Supermicro systems will find this single-module upgrade straightforward. Buyers who need non-ECC memory, higher speeds, or modules for other vendors should look elsewhere. Systems that require unbuffered DIMMs or different rank configurations are not supported.
Single stick simplifies slot planning
The package contains one 16 GB RDIMM so you can populate empty slots without buying kits. No heat spreader is included, keeping the profile low for dense chassis. There is no bundled software; the value is in tested compatibility and lifetime replacement coverage.
נקודות עיקריות
- 16 GB DDR4 capacity for larger server workloads
- 2400 MHz DDR4 speed with PC4-19200 bandwidth
- ECC registered RDIMM for data integrity
- CL17 latency at 1.20 V operation
- 288-pin 2Rx4 module built for SuperMicro compatibility
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR19200-624K1 |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2400MHZ PC4-19200 1Rx4 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory |
שאלות על הפריט הזה
Does my Supermicro server need registered ECC RDIMM slots to use this 288-pin DDR4 module?
Yes, this is a 288-pin DDR4 RDIMM with ECC and registered buffering, so the motherboard must provide registered ECC RDIMM slots.
Will this CL17 2400 MHz module run at the speed of slower DDR4 modules already installed?
The module is rated at 2400 MHz CL17; when mixed with slower DDR4 modules the system will run all memory at the lowest common speed.
How can I verify the module is detected at 16 GB and 2400 MHz after installation?
Check the BIOS memory information or the operating system memory report to confirm 16 GB capacity and 2400 MHz operating speed.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
