אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 1.2V 260-Pin SODIMM POSIFLEX JK-2452 Cachet Series Kiosk memory upgrade

SKU CH-081M-XV1H0

16 GB DDR4 3200 CL22 SODIMM module built for the POSIFLEX JK-2452 Cachet Series kiosk

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB capacity boosts kiosk responsiveness
  • DDR4 3200 speed handles peak transaction loads
  • CL22 latency keeps data flowing smoothly
  • 2 V operation reduces thermal stress
  • 260-pin SODIMM fits POSIFLEX JK-2452 Cachet Series exactly

System-specific DDR4 SODIMM for POSIFLEX JK-2452

This 16GB DDR4 3200 module is built for the POSIFLEX JK-2452 Cachet Series kiosk. It uses a 260-pin SODIMM form factor with CL22 latency and 1.20V operation. The single 2Rx8 rank design fits the platform's memory architecture precisely. IT teams select it for targeted field upgrades in deployed terminals.

Low-voltage unbuffered design runs cool and quiet

Operating at 1.2V without a heat spreader, the module draws minimal power inside the compact kiosk chassis. Unbuffered non-ECC circuitry adds no active cooling requirement. Silent operation is maintained in noise-sensitive retail or hospitality environments. Thermal load stays within the system's original design envelope.

Direct-fit 260-pin module simplifies field service

The SODIMM seats into the existing slot without adapters or cable routing changes. Major OEM chips from Samsung, Micron or Hynix provide supply-chain consistency. Non-ECC unbuffered layout matches the motherboard specification exactly. Technicians can swap memory in minutes using standard tools.

נקודות עיקריות

  • 16 GB capacity boosts kiosk responsiveness
  • DDR4 3200 speed handles peak transaction loads
  • CL22 latency keeps data flowing smoothly
  • 2 V operation reduces thermal stress
  • 260-pin SODIMM fits POSIFLEX JK-2452 Cachet Series exactly

מפרט טכני

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

שאלות על הפריט הזה

How do I install this 260-Pin DDR4 SODIMM in my POSIFLEX JK-2452 kiosk?

Power off the unit and disconnect it, open the memory compartment, align the notch on the 260-Pin SODIMM with the slot key, insert the module at an angle, then press down firmly until the side clips lock. The step most people miss is not seating the module fully before the clips engage.

Will this 16GB CL22 module need any maintenance or replacement later?

The module has no heat spreader and no moving parts, so no routine maintenance is required. If a memory error appears after years of 24/7 kiosk operation, the entire 16GB stick would be replaced as a single unit.

What limit appears first when this 3200MHz CL22 SODIMM runs sustained workloads?

The CL22 latency at 1.20V is the first bottleneck under continuous load; the fixed timing and voltage cap throughput before thermal or power limits become a factor.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.